- ページ 10

コントローラー Aeon Labs AeotecのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeon Labs Aeotec 11 ページ。 Home energy meter
Aeon Labs Aeotec にも：ユーザーマニュアル (7 ページ), マニュアル (9 ページ)

ページを印刷する

17.09.2018

If you're using a Z-Stick:

1. If your Z-Stick is plugged into a gateway or a computer, unplug it.

2. Take your Z-Stick to your Garage Door Controller.

3. Press the Action Button on your Z-Stick.

4. Press the Z-Wave Button on your Garage Door Controller.

5. If your Garage Door Controller has been successfully removed from your network, its Network LED will blink. If the

removal was unsuccessful, the Network LED will not blink.

6. Press the Action Button on the Z-Stick to take it out of removal mode.

If you're using a Minimote:

1. Take your Minimote to your Garage Door Controller.

2. Press the Remove Button on your Minimote.

3. Press the Z-Wave Button on your Garage Door Controller.

4. If your Garage Door Controller has been successfully removed from your network, its Network LED will blink. If the

removal was unsuccessful, the Network LED will not blink.

5. Press any button on your Minimote to take it out of removal mode.

Reset your Garage Door Controller.

If your primary controller is missing or inoperable, you may wish to reset your Garage Door Controller to its default

factory settings. To do this:

Press and hold the Z-Wave Button for 20 seconds and then release it.

https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-

Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs

10/11