- ページ 6

エアコン Dimplex DC12のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dimplex DC12 11 ページ。 Portable air conditioner

INSTALLATION

Locating the unit.

The appliance should not be used in damp areas such as a laundry or bathroom.

Do not place the unit where it will be in direct sunlight as it may overheat and turn off.

Extending the exhaust pipe and drain hose.

When the unit is stored, the exhaust pipe and drain hose fold away into the unit's side.

To extend the exhaust pipe and drain hose, press it down slightly and pull the top end of it

away from the unit.

The drain hose is stored within the exhaust pipe. Unroll it and extend it out through the

exhaust pipe. (For DC12RC only)

Install the portable air conditioner in a flat location

with adequate space to ensure the air inlets and

outlets will not be blocked.

Keep a minimum clearance of 40cm from walls or

other objects. Locate the unit to allow the exhaust

pipe and drain hose to reach a suitable window, as

shown.

Avoid sharp bends or kinks in the exhaust

pipe.

Use the adjustable window slider kit to

ensure the exhaust pipe and drain hose is

held in place (in the window) and to prevent

expelled hot air re-entering the room.

EXHAUST TUBE INSTALLATION

To remove the exhaust pipe, press slightly & pull away from the unit. The following

pictures indicate the removal of the exhaust pipe.

If the exhaust tube is loose, twist the tube clockwise to tighten at the base.

NOTICE

This unit has a self evaporative system which removes excess condensation by means of

evaporating water collected in the tank. Therefore saving you the hassle of having to use a drip

tray or drain hose. Please make sure the rubber cap is locked into position to avoid leakage.

Note: In high humidity, there may be excess water

condensation produced that cannot be removed or

evaporated. In this instance, the unit will need to be

drained. View WATER DRAIN for details. The unit

will automatically switch off when the internal water

tank is full.