- ページ 7
アダプター Aeon Labs Aeotec Z-Stick Gen5のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aeon Labs Aeotec Z-Stick Gen5 17 ページ。 Z-wave usb adapter
Aeon Labs Aeotec Z-Stick Gen5 にも： クイック・スタート・マニュアル (11 ページ)
ページを印刷する
Advanced functions.
4
Send a wake up notification.
In order to send your Sensor new configuration commands
from your Z-Wave controller or gateway, it will need to be woken
up.
1.
Remove your Sensor unit from its Back Mounting Plate, press
the Action Button on the back of the Sensor unit and then
release the Action Button. This will trigger and send a wake
up notification command to your controller/gateway.
2.
If you want your Sensor to keep awake for a longer time,
press and hold the Action Button on the back of the Sensor
unit for 3 seconds, then your Sensor will wake up for 10
minutes and the Status LED will fast blink while it is awake.
Removing your Sensor from your Z-Wave network.
Your sensor can be removed from your Z-Wave network at any
time. You'll need to use your Z-Wave network's main controller/