- ページ 19
カーレシーバー Pioneer AppRadio SPH-DA01のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AppRadio SPH-DA01 40 ページ。 Display unit appradio
Pioneer AppRadio SPH-DA01 にも： 操作マニュアル (32 ページ), 操作マニュアル (36 ページ), 重要なお知らせ (24 ページ), ファームウェア・アップデート (4 ページ)
ページを印刷する
After installation
After installing this product
1
Reconnect the negative (–) terminal of
the vehicle's battery.
First, double-check that all connections are
correct and that this product is installed cor-
rectly. Reassemble all vehicle components
that you previously removed. Then reconnect
the negative (–) cable to the negative (–) term-
inal of the battery.
2
Start the engine.
3
Open the cover of the microSD card
slot.
Press the right side of the cover. The left side
of the cover pops up slightly, so pull it out
gently.
4
Press the reset button.
Press the reset button on this product with a
pointed object such as the tip of a pen.
5
Make the following settings.
= For details concerning operations, refer to
Operation Manual.
1 Set the language.
2 Drive an unobstructed road until the GPS
starts receiving the signal normally.
3 Make some necessary adjustments.
! Setting the time
! Setting the units and the date format,
etc.
! Change other settings as you prefer
Note
After installing this product, be sure to check at a
safe place that the vehicle is performing normal-
ly.
Section
04
19
En