- ページ 16

カーレシーバー Pioneer AVIC-D2のPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVIC-D2 27 ページ。 Double-din dvd navigation system
Pioneer AVIC-D2 にも：オーナーズマニュアル (34 ページ), クイック・スタート・マニュアル (2 ページ), サービスマニュアル (23 ページ)

ページを印刷する

Inserting/Ejecting a Disc

• Do not use with the LCD panel left open. If

LCD panel is left open, it may result in

injury in the event of an accident.

• Do not open and close the LCD panel with

hands by force. This may cause malfunc-

tion.

• When opening, closing and adjusting the

angle of the LCD panel, be careful not to

get your finger caught.

The LCD panel will be closed automatically with

the turning of the ignition switch.

Inserting a CD

Press the OPEN/CLOSE button.

The LCD panel opens halfway, and the CD

loading slot appears.

CD loading slot

CD EJECT button

❒ To close the LCD panel, press the OPEN/

CLOSE button again.

Insert a CD into the CD loading slot.

If you insert a CD, the LCD panel closes auto-

matically, and then format reading will start.

❒ Make sure the CD loading slot is empty

before inserting a CD into the slot.

❒ When a disc is already loaded in the CD

loading slot, select the CD source by press-

ing the SRC button.

❒ You can use the AV button to switch between

navigation map displays and audio operation

displays.

❒ The built-in CD drive plays one, standard, 12-

cm or 8-cm (single) disc at a time. Do not use

an adapter when playing 8-cm discs.

❒ Do not insert anything other than a disc into

the CD loading slot.

➲ Playable discs ➞ Page 6

❒ If you cannot insert a disc completely or if a

inserted disc is not recognized, check that the

label side of the disc is up. Press the CD

EJECT button to eject the disc, and check the

disc for damage before inserting the disc

again.

❒ If the built-in CD drive does not operate prop-

erly, an error message such as ERROR-11

may be displayed.

➲ Error messages ➞ Operation Manual

Ejecting a CD

Press the OPEN/CLOSE button.

The LCD panel opens halfway.

Press the CD EJECT button.

The CD is ejected.

Press the OPEN/CLOSE button.

The LCD panel closes.