- ページ 19

カーレシーバー Pioneer AVIC-D2のPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVIC-D2 27 ページ。 Double-din dvd navigation system
Pioneer AVIC-D2 にも：オーナーズマニュアル (34 ページ), クイック・スタート・マニュアル (2 ページ), サービスマニュアル (23 ページ)

ページを印刷する

Appendix

Troubleshooting

➲ About troubleshooting other than description

below ➞ Appendix of the Operation Manual

Symptom

No picture.

Rear display picture

disappears.

Nothing is displayed

and the touch panel

keys cannot use.

Adjusting the volume

of navigation guid-

ance and beep is not

possible.

The navigation does

not boot up or CD play-

back is not possible.

Power doesn't turn on.

The system doesn't

operate.

No sounds are heard.

The volume level will

not rise.

When the ignition

switch is turned ON (or

turned to ACC), the

motor sounds.

Cause

The parking brake cord is not connected.

The parking brake is not applied.

The source without a video is selected.

There was a problem with the rear display

or a faulty wiring connection, for example.

Rear View is selected on the screen.

When the shift lever is in [R], displays rear

view camera images. (When "NAVI" is

selected in REAR DISP menu.)

The setting for the rear view camera is

incorrect.

The shift lever was placed in [R] when the

rear view camera was not connected.

The back light of the LCD panel is turned

off.

You cannot adjust them with the VOL (+/–)

button.

The disc is not inserted into the appropriate

slot.

The disc is inserted upside down.

The disc is dirty.

The disc is cracked or otherwise damaged.

The loaded disc is a type this system cannot

play.

A disc which is incompatible with this sys-

tem is inserted.

Leads and connectors are incorrectly con-

nected.

The fuse is blown.

Noise and other factors are causing the

built-in microprocessor to operate incor-

rectly.

The volume level is low.

The attenuator or mute is on.

This system confirms whether a disc is

loaded or not.

Action (See)

Connect a parking brake cord, and apply the

parking brake.

Connect a parking brake cord, and apply the

parking brake.

Switch the source with a video.

Check the rear display and its connection.

Select view mode other than Rear View.

Select SOURCE in REAR DISP menu.(or

when you move the shift lever other than [R]

position, the screen will be returned to the

previous display.)

Connect a rear view camera correctly.

Press the AV button to return to the source

display and then select the correct setting

for CAMERA.

➲ About CAMERA setting

Manual

Press the P.ADJ/B.LIGHT button to turn

on the back light.

Turn the volume up or down according to

"Volume" in the Setting menu.

Eject the disc and insert the disc to appropri-

➞

ate slot.(

About CD loading slot and DVD-

ROM loading slot ➞ Page 14)

Insert the disc with the label upward.

Clean disc.

Insert a normal, round disc.

Check what type the disc is. (➞ Page 18)

Insert a suitable disc. (➞ Page 18)

Confirm once more that all connections are

correct.

Rectify the reason for the fuse blowing, then

replace the fuse. Be very sure to install the

correct fuse with the same rate.

Press the RESET button. (➞ Page 8)

Adjust the volume level.

Turn the attenuator or mute off.

This is a normal operation.

➞

Operation