- ページ 10

カーレシーバー Pioneer AVIC-F980DABのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVIC-F980DAB 32 ページ。 Navigation av system
Pioneer AVIC-F980DAB にも：クイック・スタート・マニュアル (16 ページ), システム・ファームウェアのアップデート手順 (5 ページ)

Section

Connection

Connecting the power cord (2)

Pink (CAR SPEED SIGNAL INPUT)

This product is connected here to detect the distance the vehicle travels. Always connect the

vehicle's speed detection circuit. Failure to make this connection will increase errors in the

vehicle's location display.

WARNING

IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING

ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE

VEHICLE´S ANTILOCK BRAKING SYSTEM, AUTOMATIC GEARBOX AND

SPEEDOMETER INDICATION.

CAUTION

It is strongly suggested that the speed pulse wire be connected for accuracy of navigation

and better performance.

Note

The position of the speed detection circuit and the position of the handbrake switch vary

depending on the vehicle model. For details, consult your authorised Pioneer dealer or an

installation professional.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the handbrake. This lead must be connected to the power supply side

of the handbrake switch.

If this connection is made incorrectly or omitted, certain functions of this product will be unusable.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND MUST BE

CONNECTED TO THE POWER SUPPLY SIDE OF THE

HANDBRAKE SWITCH. IMPROPER CONNECTION OR

USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW

AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Engb

Connection method

Clamp the lead of the power supply

side of the handbrake switch.

Clamp firmly with needle-nosed

pliers.

Power supply side

Earth side

Handbrake switch