- ページ 15

カーレシーバー Pioneer AVIC-X1RのPDF ハードウェアマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVIC-X1R 30 ページ。 Dvd av navigation head-unit
Pioneer AVIC-X1R にも：マニュアル (39 ページ), ハードウェアマニュアル (27 ページ)

ページを印刷する

MAN-AVIC-X1R-EN.book Page 13 Wednesday, May 4, 2005 4:45 PM

Turning the unit on and

selecting a source

• If the program is not installed, see

"Operation Manual" and install the

program.

Turn the ignition switch (ACC) ON.

The product's power supply comes on.

Press SRC button to select a source.

Press SRC button repeatedly to switch

between the following sources:

DAB (digital audio broadcasting) – RADIO

(tuner) – TV (television) – AV (video input) –

DISC [CD, MP3, CD/MP3] (built-in DVD drive)

– S-DVD (DVD player/multi-DVD player) – M-

CD (multi-CD player) – EXT-1 (external unit 1)

– EXT-2 (external unit 2) – AUX (Auxiliary

equipment)

Press and hold to turn the source off.

In the following cases, the sound source will

not change to them:

– When a unit corresponding to each source

is not connected to this unit.

– When no disc (DVD-Video, CD) is set in this

unit.

– When no disc is set in the DVD-player (S-

DVD).

– When no magazine is set in the multi-CD

player.

– When no magazine is set in the multi-DVD

player.

– When the AUX (auxiliary input) is set to off

(refer to Operation Manual).

– When the AV (video input) is not set to

VIDEO (refer to Operation Manual).

External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

can be controlled by this unit. When two

external units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

When this unit's blue lead is connected to the

vehicle's auto-aerial relay control terminal, the

vehicle's aerial extends when ACC (ignition) is

turned on and attach the front panel. To

retract the antenna, detach the front panel.

The vehicle's aerial extends regardless of

turning this unit's source on or off.

Loading a disc

• Insert a disc into the disc loading slot.

Format reading will start.

For DVD-Video, CD

DISC AUTO is off in the default setting.

DISC AUTO

Operation Manual

When a disc is already loaded in this unit,

select the source by pressing SRC button.

To eject a disc, press EJECT button.

For the map disc

Inserting the disc starts DVD navigation

mode.

Removing the disc sets Memory navi

mode.

You can use NAVI/AV button to switch

between navigation map displays and audio

operation displays.

The DVD drive plays one, standard, 12-cm or

8-cm (single) disc at a time. Do not use an

adapter when playing 8-cm discs.

Do not insert anything other than a disc into

the disc loading slot.

Playable discs

Page 6

If you cannot insert a disc completely or if

after you insert a disc the disc is not

recognised, check that the label side of the

disc is up. Press EJECT button to eject the

disc, and check the disc for damage before

inserting the disc again.