- ページ 21

カーレシーバー Pioneer DEH P4800MPのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH P4800MP 36 ページ。 Multi-cd control high power cd/mp3/wma player with rds tuner

ページを印刷する

MAN-DEH-P4800MP-GB.fm Page 21 Thursday, September 29, 2005 11:55 AM

Multi-CD Player

50-disc multi-CD player

Only those functions described in this manual are supported by 50-disc multi-CD

players.

Introduction of advanced multi-CD player operation

Function display

Shows the function status.

RPT indicator

Shows when repeat range is

selected to current track.

* Press FUNCTION to display the

function names.

Press FUNCTION repeatedly to switch between the following functions:

RPT (repeat play) – RDM (random play) – SCAN (scan play) – ITS-P (ITS play) –

PAUSE (pause) – COMP (compression and DBE)

• To return to the playback display, press BAND.

Note

• If you do not operate the function within about 30 seconds, the display is automatically

returned to the playback display.

Repeating play

There are three repeat play ranges for the multi-CD player: MCD (multi-CD player

repeat), TRK (one-track repeat) and DSC (disc repeat).

1. Press FUNCTION to select RPT.

Press FUNCTION until RPT appears in the display.

2. Press 4 or 6 to select the repeat range.

Press 4 or 6 until the desired repeat range appears in the display.

• MCD – Repeat all discs in the multi-CD player magazine

• TRK – Repeat just the current track

• DSC – Repeat the current disc

Notes

• If you select other discs during repeat play, the repeat play range changes to MCD.

• If you perform track search or fast forward/reverse during TRK, the repeat play range

changes to DSC.

• When you select DSC for the repeating range and return to the playback display, DRPT is

displayed.

Playing tracks in random order

Random play lets you play back tracks in random order within the repeat range, MCD

and DSC.

1. Select the repeat range.

Refer to "Repeating play" on this page.

2. Press FUNCTION to select RDM.

Press FUNCTION until RDM appears in the display.

3. Press 8 to turn random play on.

RDM :ON appears in the display. Tracks will play in a random order within the

previously selected MCD or DSC ranges.

4. Press 2 to turn random play off.

RDM :OFF appears in the display. Tracks will continue to play in order.

Note

• If you turn random play on during DSC and then return to the playback display, DRDM

appears in the display.

Scanning CDs and tracks

While you are using DSC, the beginning of each track on the selected disc plays for

about 10 seconds. When you are using MCD, the beginning of the first track of each

disc is played for about 10 seconds.

1. Select the repeat range.

Refer to "Repeating play" on this page.

2. Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the display.

3. Press 8 to turn scan play on.

SCAN :ON appears in the display. The first 10 seconds of each track of the current

disc (or the first track of each disc) is played.