- ページ 8
カーレシーバー Pioneer DEH-10MPのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-10MP 26 ページ。
ページを印刷する
Section
m (
Operating this unit
Tuner
Listening to the radio
1
Press
SOURCE
to select the tuner.
2
Press
BAND
to select a band.
Press BAND until the desired band (F1, F2, F3
for
FM
or AM) is displayed.
3
To perform manual tuning, briefly press
....
or~.
4
To perform seek tuning, press and hold
.... or
~
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by briefly pressing
~or~.
•
If you press and hold
~
or
~
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Storing and recalling broadcast
frequencies
•
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
•
Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored in
memory.
• You can also use. and" to recall radio sta-
tion frequencies assigned to preset tuning but-
tons 1 to 6.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Press
FUNalON
to select
lOCAL.
IT)
En
)
2
Press. or .. to turn local seek tuning
on or off.
3
Press .... or
~
to set the sensitivity.
FM: lOCAL 1-l0CAl 2-l0CAl 3-
lOCAL 4
AM: lOCAl1-l0CAl2
The
lOCAL 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
SSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 1 to 6.
Once stored you can tune in to those frequen-
cies with the touch of button.
• Storing broadcast frequencies with SSM
may replace broadcast frequencies you
have saved using buttons 1 to
6.
1
Press
FUNalON
to select
BSM.
2
Press. to turn
BSM
on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
• To cancel the storage process, press".
C!J
Built-in Player
Playing a disc
1
Insert a
CD (CD-ROM)
into the disc load-
ing slot.
Playback will automatically start.
• Be
sure to turn up the label side of a disc.
• After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
• You can eject a CD (CD-ROM) by pressing
EJECT.
2
Press. or .. to select a folder when
playing a compressed audio.
• You cannot select a folder that does not have
a compressed audio file recorded in it.