- ページ 6

カーレシーバー Pioneer DEH-1770のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-1770 42 ページ。 High power cd player with fm/am tuner
Pioneer DEH-1770 にも：インストレーション・マニュアル (5 ページ)

ページを印刷する

Section

Tuner

Listening to the radio

1 Band indicator

Shows which band the radio is tuned to, AM

or FM.

2 LOC indicator

Shows when local seek tuning is on.

3 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

4 Frequency indicator

Shows to which frequency the tuner is

tuned.

5 Preset number indicator

Shows which preset has been selected.

Press SOURCE to select the tuner.

Use VOLUME to adjust the sound level.

Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or AM.

To perform manual tuning, briefly press

c or d.

To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

either c or d.

# If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the button.

Storing and recalling

broadcast frequencies

If you press any of the preset tuning buttons

16 you can easily store up to six broadcast

frequencies for later recall with the touch of a

button.

! Up to 18 FM stations, six for each of the

three FM bands, and six AM stations can

be stored in memory.

% When you find a frequency that you

want to store in memory press one of pre-

set tuning buttons 16 and hold until the

preset number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

% Press LOCAL/BSM repeatedly to turn

local seek tuning on or off.

When local seek tuning is on, LOC appears in

the display.