- ページ 10

カーレシーバー Pioneer DEH-44HDのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-44HD 41 ページ。 Cd rds receiver

ページを印刷する

Section

Operating this unit

The RCA outputs can be used for rear speaker or

subwoofer connection.

If you switch to SW, you can connect a rear speak-

er lead directly to a subwoofer without using an

auxiliary amp.

Initially, PREOUT is set for rear full-range speaker

connection (SW).

1 Press M.C. to select the desired setting.

SW—REA

! Even if you change this setting, there will

be no output if you select OFF in SUB.W

(Refer to SUB.W (subwoofer on/off setting)

on the previous page).

! If you change this setting, subwoofer out-

put in the audio menu will return to the fac-

tory settings.

DEMO (demo display setting)

1 Press M.C. to turn the demo display on or off.

SCROLL (scroll mode setting)

When ever scroll is set to ON, recorded text infor-

mation scrolls continuously in the display. Set to

OFF if you prefer the information to scroll just

once.

1 Press M.C. to turn the ever scroll on or off.

Selecting the illumination color

This unit is equipped with multiple-color illumi-

nation. You can select desired colors for the keys

and display of this unit. You also can customize

the colors you want to use.

Selecting the key color from the

illumination color list

You can select desired colors for the keys of this

unit.

Press

Turn M.C. to display KEY COLOR and

press to select.

Turn M.C. to select the illumination color.

You can select one option from the following list.

! 30 preset colors (WHITE to ROSE)

! SCAN (cycle through all colors)

! 3 sets of colors (WARM, AMBIENT, CALM)

! CUSTOM (customized illumination color)

Press M.C. to confirm the selection.

Notes

! When SCAN is selected, the system auto-

matically cycles through the 30 preset colors.

! When WARM is selected, the system auto-

matically cycles through the warm colors.

! When AMBIENT is selected, the system au-

tomatically cycles through the ambient col-

ors.

! When CALM is selected, the system auto-

matically cycles through the calm colors.

! When CUSTOM is selected, the customized

color saved is selected.

! To cancel selecting the illumination color,

press

Selecting the display color from

the illumination color list

You can select the desired colors for the display

of this unit.

Press

Turn M.C. to display DISP COLOR and

press to select.

Turn M.C. to select the illumination color.

You can select one option from the following list.

! 30 preset colors (WHITE to ROSE)

! SCAN (cycle through all colors)

! 3 sets of colors (WARM, AMBIENT, CALM)

! CUSTOM (customized illumination color)

Press M.C. to confirm the selection.

Operating this unit

Note

For details about colors on the list, refer to Se-

lecting the key color from the illumination color

list on this page.

Selecting key and display color

from the illumination color list

You can select the desired colors for the keys

and display of this unit.

Press

Turn M.C. to display BOTH COLOR and

press to select.

Turn M.C. to select the illumination color.

You can select one option from the following list.

! 30 preset colors (WHITE to ROSE)

! SCAN (cycle through all colors)

Press M.C. to confirm the selection.

Notes

! You cannot select 3 sets of preset colors and

CUSTOM in this function.

! Once you select a color in this function, col-

ors on the keys and display of this unit auto-

matically switch to the color you selected.

! For details about colors on the list, refer to

Selecting the key color from the illumination

color list on this page.

Customizing the illumination color

Press

Turn M.C. to display KEY COLOR or

DISP COLOR. Press to select.

Press M.C. and hold until the customizing

illumination color setting appears in the dis-

play.

Press M.C. to select the primary color.

R (red)—G (green)—B (blue)

Turn M.C. to adjust the brightness level.

Adjustment range: 0 to 60

# You cannot select a level below 10 for all three of

R (red), G (green), and B (blue) at the same time.

# You can also perform the same operation on

other colors.

Notes

! You cannot create a custom illumination

color when SCAN or a set of colors (WARM,

AMBIENT, or CALM) is selected.

! You can create custom illumination colors

for both KEY COLOR and DISP COLOR.

Switching the dimmer setting

You can adjust the brightness of illumination.

% Press and hold

Using an AUX source

Insert the stereo mini plug into the AUX

input jack.

Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on the previous page.

Turning the clock display on

or off

% Press

to turn the clock display on or

off.

# The clock display disappears temporarily when

you perform other operations, but the clock display

appears again after 25 seconds.