- ページ 9

カーレシーバー Pioneer DEH-4700BTのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-4700BT 20 ページ。 Cd rds receiver
Pioneer DEH-4700BT にも：クイック・スタート・マニュアル (33 ページ)

ページを印刷する

Select [Pioneer BT Unit] shown in the device display.

Make sure the same 6-digit number appears on this unit and the device, then

select "Yes" on the device.

NOTES

• [DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete

one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the connection menu (page 9).

• Depending on the device, the PIN code is required in step 6. In this case, input [0000].

TIP

The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,

[VISIBLE] in the connection menu needs to be set to [ON]. For details on a Bluetooth device operations,

refer to the operating instructions supplied with the Bluetooth device.

Connection menu

Menu Item

Description

DEVICELIST

Display the list of paired Bluetooth devices. "*" appears on the

device name when the Bluetooth connection is established.

DEL DEVICE

Delete the device information.

[DELETE YES],

[DELETE NO]

ADD DEVICE

A.CONN

Select [ON] to connect to a Bluetooth device automatically.

[ON], [OFF]

VISIBLE

Select [ON] so that a Bluetooth device can detect the unit when

the unit is connected via Bluetooth to another device.

[ON], [OFF]

PIN CODE

Change the PIN code.

1 Press the M.C. dial to display the setting mode.

2 Turn the M.C. dial to select a number.

3 Press the M.C. dial to move the cursor to the next position.

4 After inputting the PIN code, press and hold the M.C. dial.

After inputting the PIN code, pressing the M.C. dial returns you

to the PIN code input display, and you can change the PIN code.

DEV. INFO

Switch the device information on the display between the

device name and Bluetooth device address.

GUEST MODE

Select [ON] to move to the [DEL DEVICE] screen automatically

when the unit has already been paired with three devices.

[ON], [OFF]

Menu Item

Description

A.PAIRING

Select [ON] to pair the unit and iPhone automatically when an

iPhone is connected to the unit via USB. (This function may not

[ON], [OFF]

be available depending on the version of iOS you are using.)

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two

Bluetooth telephones can be connected simultaneously.

Important

• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running

can drain the vehicle's battery.

• Be sure to park your vehicle in a safe place and apply the parking brake before operation.

To make a phone call

Press

to display the phone menu.

When two phones are connected, a phone name appears first then a phone menu

will display. To switch to another phone, press

Turn the M.C. dial to select [MISSED], [DIALLED], [RECEIVED] or [PHONE BOOK],

then press to confirm.

The phone number list appears.

Turn the M.C. dial to select a name or phone number, then press to confirm.

The phone call starts.

To answer an incoming call

Press

when a call is received.

TIP

When two phones are connected to the unit via Bluetooth and there is an incoming call while one

phone is being used for a call, a message will appear in the display. To answer that incoming call, you

need to end the existing call.

Basic operations

Purpose

Operation

End a call

Press

Reject an incoming call

Press and hold

Switch between the current caller

Press the M.C. dial.

and a caller on hold

again.

when a call is received.