- ページ 16

カーレシーバー Pioneer DEH-7200SDのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-7200SD 28 ページ。 Cd rds receiver
Pioneer DEH-7200SD にも：クイック・スタート・マニュアル (9 ページ), インストレーション・マニュアル (8 ページ)

ページを印刷する

Section

Operating this unit

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

Language select (multi language)

For your convenience, this unit equips multiple lan-

guage display. You can select the language best sui-

ted to your first language.

1 Press M.C. to select the language.

English—Français—Italiano—Español—

Deutsch—Nederlands—РУССКИЙ

Calendar (setting the date)

1 Push M.C. left or right to select the segment of

the calendar display you wish to set.

Year—Day—Month

2 Push M.C. up or down to set the date.

Clock (setting the clock)

1 Push M.C. left or right to select the segment of

the clock display you wish to set.

Hour—Minute

2 Push M.C. up or down to put a clock right.

! You can match the clock to a time signal by press-

ing M.C.

! If 00 to 29, the minutes are rounded down.

(e.g., 10:18 becomes 10:00.)

! If 30 to 59, the minutes are rounded up. (e.g.,

10:36 becomes 11:00.)

EngineTime alert (elapsed time display setting)

This setting allows you to measure the length of time

that elapses from when the machine is turned on and

display the amount of elapsed time per set period.

Also, you will hear alarm.

1 Press M.C. to select your favorite setting.

OFF—15Minutes—30Minutes

FM step (FM tuning step)

Normally the FM tuning step employed by seek tuning

is 50 kHz. When AF or TA is on, the tuning step auto-

matically changes to 100 kHz. It may be preferable to

set the tuning step to 50 kHz when AF is on.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the FM tuning step.

50kHz (50 kHz)—100kHz (100 kHz)

Auto PI (auto PI seek)

The unit can automatically search for a different sta-

tion with the same programming, even during preset

recall.

1 Press M.C. to turn Auto PI seek on or off.

USB plug&play (plug and play)

This setting allows you to switch your source to USB/

IPOD automatically.

1 Press M.C. to turn the plug and play on or off.

! ON – When USB storage device/iPod is con-

nected, the source is automatically switched

to USB/IPOD. If you disconnect your USB sto-

rage device/iPod, this unit's source is turned

off.

! OFF – When USB storage device/iPod is con-

nected, the source is not switched to USB/

IPOD automatically. Please change the source

to USB/IPOD manually.

Warning tone (warning tone setting)

If the front panel is not detached from the head unit

within four seconds of turning off the ignition, a warn-

ing tone sounds. You can turn off the warning tone.

1 Press M.C. to turn the warning tone on or off.

AUX (auxiliary input)

Activate this setting when using auxiliary device con-

nected to this unit.

1 Press M.C. to turn auxiliary setting on or off.

Dimmer (dimmer setting)

To prevent the display from being too bright at night,

the display is automatically dimmed when the car's

headlights are turned on. You can turn the dimmer on

or off.

1 Press M.C. to turn dimmer on or off.

Brightness (display brightness setting)

1 Push M.C. left or right to adjust the brightness

level.

0 to 15 is displayed as the level is increased or de-

creased.

! When dimmer is functioning, the brightness

level can be adjusted 0 to 10.

S/W control (rear output and subwoofer setting)