- ページ 13

カーレシーバー Pioneer DEH-7300BTのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-7300BT 29 ページ。 Cd rds receiver
Pioneer DEH-7300BT にも：オーナーズマニュアル (23 ページ), インストレーション・マニュアル (29 ページ)

ページを印刷する

Operating this unit

! The following functions are still accessible

from the unit even if the control mode is set to

CTRL iPod/CTRL APP.

— Pausing

— Fast forward/reverse

— Track up/down

— Repeat play (ONE/ALL/OFF)

— Random play (shuffle)

—

(list) to use iPod menu

— a to turn the iPod click wheel to the left

— b to turn the iPod click wheel to the right

! When the control mode is set to CTRL iPod,

operations are limited as follows:

— The function settings are not available.

— The browse function cannot be operated

from this unit.

Bluetooth Telephone

Connection menu operation

Important

Be sure to park your vehicle in a safe place and

apply the parking brake when performing this op-

eration.

Press and hold

nection menu.

# You cannot operate this step during a call.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

DEVICELIST (connecting or disconnecting a cellular

phone from the device list)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to connect/disconnect.

! Press and hold M.C. to switch the BD address

and device name.

3 Press M.C. to connect/disconnect the selected

cellular phone.

If the connection is established, * is indicated on

the device name.

DEL DEVICE (deleting a cellular phone from the de-

vice list)

to display the con-

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to switch the BD address

and device name.

3 Press M.C. to display DELETE YES.

4 Press M.C. to delete a cellular phone information

from the device list.

! While this function is in use, do not turn off the

engine.

ADD DEVICE (connecting a new cellular phone)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

2 Turn M.C. to select a device from the device list.

! If the desired device is not displayed, select

RE-SEARCH.

3 Press and hold M.C. to switch the BD address

and device name.

4 Press M.C. to connect the selected cellular

phone.

! To complete the connection, check the device

name (DEH-7300BT) and enter the link code

on your cellular phone.

! PIN code is set to 0000 as the default. You

can change this code. Refer to PIN CODE (PIN

code input) on this page.

! If five devices are already paired, DEVICEFULL

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

SPCL. DEV. (setting a special device)

Bluetooth devices that are difficult to establish a con-

nection with are called special devices. If your Blue-

tooth device is listed as a special device, select the

appropriate one.

1 Press M.C. to display the setting mode.

2 Use M.C. to select a special device.

Turn to change the menu option. Press to select.

! If five devices are already paired, DEVICEFULL

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

3 Turn M.C. to display this unit's device name, BD

address and pincode.

4 Use a cellular phone to connect to this unit.

! To complete the connection, check the device

name (DEH-7300BT) and enter the link code

on your cellular phone.

! PIN code is set to 0000 as the default. You

can change this code. Refer to PIN CODE (PIN

code input) on this page.

Section