- ページ 11

カーレシーバー Pioneer DEH-P3000IBのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-P3000IB 20 ページ。 Pioneer deh-p3000ib: install guide
Pioneer DEH-P3000IB にも：インストレーション・マニュアル (4 ページ), インストレーション・マニュアル (7 ページ)

ページを印刷する

Operating this unit

! Charging the portable audio player using

car's DC power source while connecting it to

AUX input may generate noise. In this case,

stop charging.

! External unit refers to a Pioneer product (such

as ones available in the future) that, although

incompatible as a source, enables control of

basic functions with this unit. Two external

units can be controlled with this unit. When

two external units are connected, the external

unit is automatically allocated to external unit

1 or external unit 2 by this unit.

! When this unit's blue/white lead is connected

to the vehicle's auto-antenna relay control

terminal, the vehicle's antenna extends when

this unit's source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Turn MULTI-CONTROL to adjust the

sound level.

Tuner

Basic Operations

Important

If you are using this unit in North, Central or

South America, reset the AM tuning step (see

Setting the AM tuning step on page 24).

% Select a band

Press BAND.

# Band can be selected from among FM1, FM2,

FM3 or AM.

% Manual tuning (step by step)

Push MULTI-CONTROL left or right.

% Seek tuning

Push and hold MULTI-CONTROL left or right

for about one second and release.

# You can cancel seek tuning by pushing

MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or

right, you can skip stations. Seek tuning starts as

soon as you release MULTI-CONTROL.

Note

Listening AM radio while connecting iPod to this

unit may generate noise. In this case, disconnect

iPod from this unit and noise is disappeared.

Storing and recalling broadcast

frequencies

You can easily store up to six broadcast fre-

quencies for later recall.

! Six stations for each band can be stored in

memory.

Press LIST.

Preset screen is displayed.

Use MULTI-CONTROL to store the se-

lected frequency in memory.

Turn to change the preset number. Press and

hold to store.

# You can also store the frequency in memory

by pushing and holding MULTI-CONTROL right.

Section