- ページ 4

カーレシーバー Pioneer MXT-X366BTのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer MXT-X366BT 25 ページ。 Complete car audio package digital media receiver and 16cm 2-way speakers
Pioneer MXT-X366BT にも：オーナーズマニュアル (49 ページ)

ページを印刷する

Section

Using this unit

Selecting a source

1 Press SRC/OFF to cycle between:

RADIO—USB/iPod—PANDORA—APP (appli-

cation)—AUX—BT AUDIO

! USB MTP displays while the MTP connection

is in use.

! Only for MXT-X166UI

When there is an iPod connected and a source

other than iPod is selected, you can switch to

iPod by pressing iPod.

! The service from Pandora is currently only

available in Australia and New Zealand. We

recommend that you turn PANDORA off in re-

gions in which it is not available. For details,

refer to PANDORA (Pandora activation) on

page 13.

! BT AUDIO is not available for MXT-X166UI.

Adjusting the volume

1 Turn M.C. to adjust the volume.

Note

When this unit's blue/white lead is connected to

the vehicle's auto-antenna relay control termi-

nal, the vehicle's antenna extends when this

unit's source is turned on. To retract the anten-

na, turn the source off.

Use and care of the remote

control

Using the remote control

1 Point the remote control in the direction of the

front panel to operate.

When using for the first time, pull out the film

protruding from the tray.

Replacing the battery

1 Slide the tray out on the back of the remote

control.

2 Insert the battery with the plus (+) and minus

(–) poles aligned properly.

WARNING

! Keep the battery out of the reach of children.

Should the battery be swallowed, consult a

doctor immediately.

! Batteries (battery pack or batteries installed)

must not be exposed to excessive heat such

as sunshine, fire or the like.

CAUTION

! Remove the battery if the remote control is

not used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic ob-

jects.

! If the battery leaks, wipe the remote control

completely clean and install a new battery.

Using this unit

! When disposing of used batteries, comply

with governmental regulations or environ-

mental public institutions' rules that apply in

your country/area.

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under

the brake or accelerator pedal.

Frequently used menu

operations

Returning to the previous display

Returning to the previous list (the folder one level

higher)

1 Press

/DIMMER.

Returning to the ordinary display

Canceling the main menu

1 Press BAND/ .

Returning to the ordinary display from the list

1 Press BAND/ .

Radio

Basic operations

Selecting a band

1 Press BAND/

until the desired band is dis-

played.

! MXT-X366BT

FM1, FM2, FM3 for FM, MW or SW1, SW2 for

shortwave

! MXT-X166UI

FM1, FM2,FM3 for FM or AM

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function.

! Use the a and b on the remote control to

switch between preset stations.

Manual tuning (step by step)

1 Press c or d.

! Select MAN (manual tuning) under SEEK to

use this function.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

you release c or d.

Notes

! For details about SEEK, refer to SEEK (left/

right key setting) on page 5.

! This unit's AF (alternative frequencies

search) function can be turned on and off.

AF should be off for normal tuning operation

(refer to AF (alternative frequencies search)

on page 5).