カーレシーバー Pioneer SPH-C10BTのPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Pioneer SPH-C10BT 6 ページ。 Smartphone receivers
Pioneer SPH-C10BT にも： 操作マニュアル (34 ページ), インストレーション・マニュアル (12 ページ)
ページを印刷する
System Firmware Update Instructions for Pioneer SMARTPHONE
Receivers
(SPH-C10BT)
This firmware update (version 8.21) applies only to the following models of Pioneer products sold in the
Singapore, Malaysia, Indonesia, Philippines, Sri Lanka, Vietnam, Thailand, Cambodia, Myanmar and
Laos.
IMPORTANT
Please download and print these firmware update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
Note: If you have any questions, please contact the nearest Pioneer Customer Service at your country.
You can refer to
https://sg.pioneercarentertainment.com/service
In order to perform this update, the following items are needed:
•
Pioneer SmartPhone receiver listed above.
•
A USB storage device meeting the following requirements.
-
2 GB or larger in capacity, formatted to FAT32
-
Blank (should not contain any files)
CAUTION
•
DO NOT turn your unit off or eject the USB storage device while the firmware is being updated.
•
You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
SPH-C10BT
for more information.