- ページ 2
カーレシーバー Pioneer SUPER TUNER III D FH-P4200MPのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer SUPER TUNER III D FH-P4200MP 4 ページ。 Owner's manual
Pioneer SUPER TUNER III D FH-P4200MP にも： オーナーズマニュアル (34 ページ)
ページを印刷する
Installation
Note:
• Before making a final installation of the unit, tem-
• If installation angle exceeds 30° from horizontal,
porarily connect the wiring to confirm that the
the unit might not give its optimum performance.
connections are correct and the system works
(Fig. 3)
properly.
• Use only the parts included with the unit to ensure
proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation
30˚
requires the drilling of holes or other modifica-
tions of the vehicle.
• Install the unit where it does not get in the driver's
way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• The semiconductor laser will be damaged if it
• In some types of automobiles, discrepancy may
overheats, so don't install the unit anywhere hot
occur between this unit and the dashboard. If this
— for instance, near a heater outlet.
happens, use the supplied panel to fill the gap.
Installation using the screw holes on the side of the unit
Fastening the unit to the factory radio mounting bracket. (Fig. 4) (Fig. 5)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 3 or 4 places on each side.
Use either binding screws (5 × 8 mm) or flush surface
screws (5 × 8 mm), depending on the shape of the screw
.
holes in the bracket
Fig. 3
Screw
Be sure to use the screws
supplied with this product.
Factory radio mounting bracket
<ENGLISH>
Fig. 4
If the pawl gets in the
way, bend it down.
Dashboard or Console
Fig. 5