- ページ 7

カーレシーバー Pioneer Super Tuner IIID AVH-P3100DVDのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer Super Tuner IIID AVH-P3100DVD 43 ページ。 Dvd rds av receiver
Pioneer Super Tuner IIID AVH-P3100DVD にも：インストレーション・マニュアル (38 ページ), パンフレット (9 ページ), クイック・スタート・マニュアル (8 ページ), インストレーション・マニュアル (8 ページ)

Connecting the units

Fuse resistor

Violet/white

Of the two lead wires connected to the back lamp, connect the one

in which the voltage changes when the gear shift is in the

REVERSE (R) position. This connection enables the unit to

sense whether the car is moving forwards or backwards.

Yellow/black

If you use equipment with Mute function, wire this lead to the

Audio Mute lead on that piece of equipment. If not, keep the

Audio Mute lead free of any connections.

Connection method

1. Clamp the lead.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner's Manual or dealer.

Light green

Used to detect the ON/OFF status of the parking

brake. This lead must be connected to the power

supply side of the parking brake switch.

Blue/white

Connect to system control terminal of the power amp or

auto-antenna relay control terminal (max. 300 mA 12 V DC).

With a 2 speaker system, do not connect anything to the speaker leads

that are not connected to speakers.

When you connect the separately sold

multi-channel processor (e.g., DEQ-P8000) to

this unit, do not connect anything to the

speaker leads and system remote control

(blue/white).

2. Clamp firmly with

needle-nosed pliers.

Power supply side

Ground side

Note:

· Change the initial setting of this unit (refer

to the Operation Manual). The subwoofer

output of this unit is monaural.

Parking brake

switch