- ページ 3
カーレシーバー Pioneer Super Tuner IIID AVIC-X910BTのPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Pioneer Super Tuner IIID AVIC-X910BT 3 ページ。 Avic x-series
Pioneer Super Tuner IIID AVIC-X910BT にも： クイック・スタート・マニュアル (2 ページ), パンフレット (9 ページ)
ページを印刷する
Step 5
Turn off your vehicle and turn on again, and wait for your system to boot up.
Confirming that the Firmware Update was Successfully Installed
Step 6
Please follow the steps below to confirm the update process was successful:
6-1. Confirm your System Firmware Version
•
Press the "Menu" button
•
Select the "Settings" tab
•
Select "System Settings"
•
Select "Service Information"
•
Confirm that your system correctly displays the following information:
Version: 3.020100
Your navigation system is now ready for use.
Post-Update procedures
Step 7
7-1. Calibrate the Screen
Press the "Menu" button and touch the "Settings" tab. Select "System Settings", and touch
the "Screen Calibration" button.
Proceed with the guidance shown on the display and tap the screen to align the calibration.
Questions
If you have any questions, please contact the Pioneer Customer Service Center at 1-800-421-
1404. Pioneer service representatives are available Monday through Friday, 10:00 a.m. to
7:30 p.m. (Eastern Time).
"Boot Up Screen"