- ページ 14

カーレシーバー Pioneer Super Tuner IIID DEH-P7100BTのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer Super Tuner IIID DEH-P7100BT 43 ページ。 Cd rds receiver
Pioneer Super Tuner IIID DEH-P7100BT にも：補足マニュアル (2 ページ), パンフレット (9 ページ), インストレーション・マニュアル (7 ページ), クイック・スタート・マニュアル (9 ページ)

Installation

Note

• Do not install this unit in such a place as may

obstruct the driver's view.

• Since interior layout differs depending on the type

of vehicle, the ideal installation location for the

unit also differs. When installing the unit, select

a location that assures optimum transmission of

signals from the unit to the car stereo.

Installing the unit on a left-hand

drive car

Note

• When the unit is installed on a right-hand-drive

car, the horizontal positions are inverted.

1. Hook the belt on to the holder.

2. Fix the holder to the inside edge of

the steering wheel so that the holder

is facing the driver.

• 12 Wrap the belt around the outside edge of the

steering wheel, passing the end through the slot

in the holder.

3 Pull on the belt to tighten it then secure it using

the other two hooks on the holder.

3. 4 Cut off the extra portion of the belt.

• 5 If some of the belt still protrudes, fold it back

into the slot so that it does not interfere with

driving.

4. Fasten the other belt in the same way.

5. Install the remote control unit in the

holder.

• When removing the remote control unit from

the holder, move the corrugated release section

toward the steering wheel and slide the remote

control unit toward you.