- ページ 20

カーレシーバー Pioneer Tuner III DEH-2150UBのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer Tuner III DEH-2150UB 27 ページ。 Cd receiver

ページを印刷する

Section

Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts. Use of un-

authorized parts may cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

! When installing, to ensure proper heat disper-

sal when using this unit, make sure you leave

ample space behind the rear panel and wrap

any loose cables so they are not blocking the

vents.

DIN front/rear mount

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes at the sides of unit chas-

sis). For details, refer to the following installa-

tion methods.

DIN Front-mount

Installation with the rubber bush

Insert the mounting sleeve into the

dashboard.

When installing in a shallow space, use a sup-

plied mounting sleeve. If there is enough

Downloaded from Caradio-Manual.com Manuals

60°

space behind the unit, use factory supplied

mounting sleeve.

Secure the mounting sleeve by using a

screwdriver to bend the metal tabs (90°)

into place.

Install the unit.

Dashboard

Mounting sleeve

Removing the unit

Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with a groove downwards and attach it.)

Trim ring

! It becomes easy to remove the trim ring if

the front panel is released.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Rubber bush

Screw