- ページ 13
カーレシーバー Pioneer X-CM66DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer X-CM66D 39 ページ。 Cd receiver system
ページを印刷する
Getting started
Sound controls
Equalizer
When the EQ is pressed, the current mode setting will be
displayed. To change to a different mode, press the EQ
repeatedly until the desired sound mode appears.
FLAT
A flat and basic sound
A powerful sound that
ACTIVE
emphasizes low and high tones
A sound that allows the radio or
DIALOGUE
vocals to be heard more easily
A sound that can be enjoyed
NIGHT
at night even with lower volume
P.BASS control
When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.
BASS/TREBLE control
Press the SOUND to select "BASS" or "TREBLE", then
press / to adjust the bass or treble.
Note
• The EQ and P.BASS cannot operate simultaneously.
The most recently selected of these two functions will
be the one used.
• SOUND can operate alongside either the EQ or
P.BASS.
When one of the above two functions is selected,
the function that is not selected will be displayed
as follows.
1
When P.BASS setting (ON/OFF) is changed
• EQ : FLAT
2
When EQ setting is changed
• P.BASS : OFF
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
1
Press Í to turn the power on.
2
Press and hold TIMER on the remote
control.
3
Press / to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
Press / to select "TIMER SET", then
4
press ENTER.
5
Press / to select the timer playback
source, then press ENTER.
CD, DAB, FM and USB can be selected as the playback
source.
6
Press / to select the timer day, then
press ENTER.
7
Press / to set the hour, then press
ENTER.
8
Press / to set the minute, then press
ENTER.
Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume press VOL +/– , then
press ENTER.
"
" appears on the display.
10 Press Í to enter the power standby mode.
The TIMER indicator lights up.
04
13
En