- ページ 33

カーレシーバー Pioneer X-HM81-KのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer X-HM81-K 42 ページ。 Network cd receiver system
Pioneer X-HM81-K にも：クイック・スタート・マニュアル (33 ページ)

ページを印刷する

 Audio playback is undesirably stopped or disturbed.

 You may be using a USB 1.0 compatible device. We

recommend you use a USB 2.0 compatible device.

 File cannot be played.

 Is the file copyright-protected (by DRM)?

files cannot be played.

 This is not a problem with this receiver. Files stored on a

computer cannot be played. It may not be possible to play

some files.

 When connecting the USB storage device, this receiver

switches off.

 Is Timer indicator flashing? The USB storage device does not

work or power consumption is too large. Disconnect the USB

storage device and turn this receiver on.

When an iPod/iPhone/iPad is connected

 Can't operate the iPod/iPhone/iPad.



Make sure the iPod/iPhone/iPad is connected correctly

(refer

Connecting iPod/iPhone to the docking station on

page 14

. Also, try disconnecting the iPod/iPhone/iPad

)

then reconnecting it.

 Confirm that the connected iPod/iPhone/iPad is supported by

this receiver.

 If the iPod/iPhone/iPad is experiencing a hangup, try resetting

the iPod/iPhone/iPad, and reconnect it to the receiver.

Network

 Cannot access to the network.

 The LAN cable is not firmly connected.

LAN cabl

e (page 10).

 Confirm the network type (Network Setting

Type). When Auto is selected in Network Type, the network

type is automatically switched between Wired and Wireless.

 Cannot access to the network using WPS.

 Network Type

is set to

Wired

Network Type

to use WPS connection. See

Wireless

Auto

change the network type. When using WPS connection,

be sure the LAN cable is not connected to the receiver and

turn this receiver on.

 Cannot access to the component or PC connected via

network.

 Internet security software is currently installed in the

There are cases where a component

connected component.

with Internet security software installed cannot be

accessed.

 The audio component on the network which has been

switched off is switched on. Switch on the audio component

on the network before switching on this receiver.

 The component connected to the network is not properly set. If

the client is automatically authorized, you need to enter the

corresponding information again. Check whether the

connection status is set to "Do not authorize".

 There are no playable audio files on the component connected

to the network. Check the audio files stored on the component

connected to the network.

 Playback does not start.

 The component is currently disconnected from this receiver or

the power supply.

properly connected to this receiver or the power supply.

 The PC or Internet Radio is not properly operated.

 The corresponding IP address is not properly set.

the built-in DHCP server function of your router, or set up

the network manually according to your network

environment (

 The IP address is being automatically configured.

 The automatic configuration process takes time. Please wait.

 The audio files stored on components on the network, such

as a PC, cannot be played back.

 Windows Media Player 11 or Windows Media Player 12 is not

currently installed on your PC. Install Windows Media Player

11 or Windows Media Player 12 on your PC (page 28).

 Audio files were recorded in formats other than MP3, WAV

Firmly connect the

(LPCM only), MPEG-4 AAC, FLAC, and WMA. Play back audio

files recorded in MP3, WAV (LPCM only), MPEG-4 AAC, FLAC,



or WMA. Note that some audio files recorded in these formats

Network

may not be played back on this receiver.

 Audio files recorded in MPEG-4 AAC or FLAC are being played

back on Windows Media Player 11 or Windows Media Player

12. Audio files recorded in MPEG-4 AAC or FLAC cannot be

must be set

played back on Windows Media Player 11 or Windows Media

page 25

Player 12. Try using another server. Refer to the operation

manual supplied with your server.

 The component connected to the network is not properly

operated. Check whether the component is affected by special

circumstances or is in the sleep mode. Try rebooting the

component if necessary.

 The component connected to the network does not permit file

sharing. Try changing the settings for the component

connected to the network.

Check whether the component is

Switch on

page 10

Additional information

 The folder stored on the component connected to the network

has been deleted or damaged. Check the folder stored on the

component connected to the network.

 Network connections could be restricted due to the

computer's network settings, security settings, etc. Check the

computer's network settings, security settings, etc.

 Cannot access Windows Media Player 11 or Windows

Media Player 12.

 In case of Windows Media Player 11: You are currently logged

onto the domain through your PC with Windows XP or

Windows Vista installed. In case of Windows Media Player 12:

You are currently logged onto the domain through your PC with

Instead of logging onto the domain,

Windows 7 installed.

log onto the local machine.

 Audio playback is undesirably stopped or disturbed.

 The audio file currently being played back was not recorded in

a format playable on this receiver. Check whether the audio file

was recorded in a format supported by this receiver. Check

whether the folder has been damaged or corrupted. Even audio

files listed as playable on this receiver may sometimes not be

played back or displayed (page 39).

 The LAN cable is currently disconnected. Connect the LAN

cable properly (page 10).

 There is heavy traffic on the network with the Internet being

accessed on the same network. Use 100BASE-TX to access the

components on the network.

 When in the DMR mode, depending on the external controller

being used, playback may be interrupted when a volume

operation is performed from the controller. In this case, adjust

the volume from the receiver or remote control.

 There is a connection routed through a wireless LAN on the

same network. There may be a shortage of bandwidth on the

2.4 GHz band used by the wireless LAN. Make wired LAN

connections not routed through a wireless LAN. Install away

from any devices emitting electromagnetic waves on the 2.4

GHz band (microwave ovens, game consoles, etc.). If this does

not solve the problem, stop using other devices that emit

electromagnetic waves.

 Cannot listen to Internet Radio stations.

 The firewall settings for components on the network are

currently in operation. Check the firewall settings for

components on the network.

 You are currently disconnected from the Internet. Check the

connection settings for components on the network, and

consult with your network service provider if necessary

(page 10).