- ページ 12

カーレシーバー Pioneer XDV-P650のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer XDV-P650 38 ページ。 Xdv-p650

Installation

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame.

To remove the frame, extend top and bottom of the frame outwards in order to unlock it.

(When reattaching the frame, point the side with a groove downwards and attach it.)

• It becomes easy to remove the frame if the front panel is released.

2. Fastening the unit to the factory radio mounting bracket.

Factory radio mounting bracket

Insert the supplied extraction keys into the

unit, as shown in the figure, until they

click into place. Keeping the keys pressed

against the sides of the unit, pull the unit

out.

Frame

Select a position where the screw holes of the

bracket and the screw holes of the head unit

become aligned (are fitted), and tighten the

screws at 2 places on each side. Use either

truss screws (5 × 8 mm) or flush surface

screws (5 × 8 mm), depending on the shape of

the screw holes in the bracket.

Screw

Dashboard or Console