- ページ 43
カーレシーバー Pioneer XV-DV360のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer XV-DV360 48 ページ。 5.1 home theater system with usb* connection for jpeg “slideshow with music”
Pioneer XV-DV360 にも： 仕様 (2 ページ), セッティング (2 ページ)
ページを印刷する
Additional information
Problem
Color problems occur
with your monitor after
changing the HDMI
Color setting (page 26).
Error Messages
Message
REC MODE (U.K. model) • An operation is prohibited because the Recording Mode is on (page 33).
SND. DEMO
CANNOT
MUTING
STEREO
TRAYLOCK
USB ERR
HDMI ERR (U.K. model) • See HDMI connection (U.K. model only) above for troubleshooting tips. See also
EEP ERR
EXIT
Resetting the system
Use this procedure to reset all system settings
to the factory default.
•
With the system on, press
ON while holding down
panel).
The next time you switch on, all the system
settings should be reset.
Setting the Key Lock
You can disable the front panel buttons by
switching the Key Lock feature on.
1
With the system in standby, press SETUP
and use
to choose KEYLOCK then press
ENTER .
This is shown in the front panel display.
Remedy
• Depending on the connected equipment, some HDMI Color settings may cause
the picture to be displayed incorrectly. In this case, use the TV's own video input
settings to select RGB, if possible. Alternatively, revert to the previous HDMI Color
setting.
Description
• The sound demo is on. See General in Troubleshooting on page 40.
• An operation is prohibited because DVD/CD isn't selected, headphones are
connected, or TEST TONE is pressed during disc playback.
• An operation is prohibited because the sound is muted (press MUTE).
• An operation is prohibited because the DVD/CD or USB function isn't selected.
• The tray lock is on. See General in Troubleshooting on page 40.
• See Important in Using the USB interface on page 22 for more on this.
Resetting the HDMI connection on page 34 if the problem persists.
• Contact your Pioneer authorized service center or your dealer for servicing.
• Appears when a menu is automatically exited after a set period of inactivity.
STANDBY/
USB (front
2
Use
to select LOCK ON or LOCK OFF
then press ENTER .
Using the language code list
Some of the language options (see Language
settings on page 27) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1
Select 'Other Language'.
2
Use
to select either a code letter or
a code number.
3
Use
to select a code letter or a code
number.
See the Language code list (next page) for a
complete list of languages and codes.
10
43
En