- ページ 2
レシーバー Pioneer AVH-P5900DVDのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVH-P5900DVD 9 ページ。 Pioneer avh-p5900dvd: install guide
Pioneer AVH-P5900DVD にも： インストレーション・マニュアル (5 ページ), サービスマニュアル (16 ページ)
ページを印刷する
Connecting the Units
Connecting the power cord
15 cm (5-7/8 in.)
14 cm (5-1/2 in.)
IP-BUS input
(Blue)
IP-BUS cable
This product
Multi-CD player
(sold separately)
15 cm (5-7/8 in.)
Antenna cable
Fuse (10 A)
Yellow
Connect to the constant 12 V supply terminal.
Red
Fuse resistor
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Fuse resistor
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
White
Gray
+
+
Front speaker
Front speaker
≠
≠
Left
White/black
Gray/black
Right
Green
Violet
+
+
Rear speaker or
Rear speaker or
Subwoofer (4 Ω)
Subwoofer (4 Ω)
≠
≠
Green/black
Violet/black
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything to Green and Green/black leads.
+
Green
Violet
Subwoofer (4 Ω)
Not used.
× 2
Green/black
Violet/black
≠
Dock connector port
iPod with Dock
Connector
Gray
Interface cable (e.g., CD-I200)
(sold separately)
Dock connector
2 m (6 ft.7 in.)
20 cm (7-7/8 in.)
AUX jack (3.5 ø)
Yellow/black
Use a mini plug cable to
connect with auxiliary
If you use equipment with Mute function, wire this lead to
equipment.
the Audio Mute lead on that piece of equipment. If not,
keep the Audio Mute lead free of any connections.
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the parking
brake switch.
Parking brake
Power supply side
switch
Blue/white
Connect to system control terminal of the power
Ground side
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
When you connect the separately sold multi-
Note:
channel processor (e.g., DEQ-P8000) to this
• Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit
unit, do not connect anything to the speaker
leads and system remote control
is monaural.
(blue/white).
When connecting to separately sold power amp
Subwoofer output (SUBWOOFER
OUTPUT or DEQ OUTPUT)
20 cm (7-7/8 in.)
Rear output
This product
(REAR OUTPUT)
Front output
(FRONT OUTPUT)
15 cm (5-7/8 in.)
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
When you connect the separately sold multi-
channel processor (e.g., DEQ-P8000) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
When you connect the multi-channel
processor to this unit, refer to multi-channel
processor's installation manual for the
connection method.
ENGLISH
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Connect with RCA cables
(sold separately)
System remote control
Left
Right
+
+
Front speaker
Front speaker
≠
≠
+
+
Rear speaker
Rear speaker
≠
≠
+
+
Subwoofer
Subwoofer
≠
≠
Perform these connections when
using the optional amplifier.
Note:
• Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.