- ページ 2

レシーバー Pioneer AVIC-X930BTのPDF ファームウェア・アップデートの手順をオンラインで閲覧またはダウンロードできます。Pioneer AVIC-X930BT 2 ページ。 Multimedia av navigation receiver
Pioneer AVIC-X930BT にも：ファームウェア・アップデートの手順 (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

If your system does not reboot and start the update process within one minute, then please check your system and

microSD card as follows:

•

Check the model number of your navigation system and version number of your current software, as

detailed above in the "Before Updating" section.

•

Check the microSD Card and confirm that the 'AVICZ110' folder is the only folder on the microSD card.

There should be no other files.

Step 4

Please wait a few minutes (approximately 3 to 5 minutes) for the firmware update to be completed. The AVIC-

X930BT will automatically reboot after the firmware update is completed.

Step 5

Once the firmware update is completed, please perform the following steps to confirm that the firmware update was

successful:

•

Press the "HOME" key

•

Select the "Settings" tab

•

Select "System Settings"

•

Select "Service Information"

•

Press & hold left upper corner of the "Service Information" screen for a few seconds

•

Confirm that your system correctly displays the below information:

Platform Version: 3.000

Application Version: 3.002

Step 6

Please eject the microSD Card from the AVIC-X930BT. Your AVIC-X930BT is now ready for use.

Questions

If you have any questions, please contact Pioneer Customer Service toll free at 800-421-1404, Monday through

Friday from 10:30 AM – 2:30 PM and 3:30 – 7:00 PM (Eastern Time), except holidays.

------------------------------------------------------------