- ページ 8
レシーバー Pioneer BD-V3000 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer BD-V3000 Series 8 ページ。 Digital home terminal
ページを印刷する
TROUBLESHOOTING
NO TV PICTURE?
Use the checklist in the table if you followed all the
instructions but still do not see a picture on your
television.
ACTION
Is cable service connected to
1
BD-V3000
connector?
Is a cable connected between
BD-V3000 TO TV connector
and TV input connector; or
2
between BD-V3000 VIDEO and
L/R AUDIO output connectors
and TV VIDEO and L/R AUDIO
input connectors?
Is the BD-V3000 AC cord
plugged in to an unswitched
3
AC outlet?
Are both BD-V3000 and TV
4
turned on?
Is your TV tuned to the correct
channel (3 or 4), or set to
5
display the A/V (audio/video)
input? If no picture on one
channel, try the other.
Has there been a recent
lightning storm? If so, reset
6
your BD-V3000. (See the
"Lightning Protection Circuit"
section.)
TRADEMARKS AND COPYRIGHTS
DOLBY DIGITAL
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories. Confidential
and Unpublished Works, ©1992 — 1997 Dolby
Laboratories. All rights reserved.
PIONEER CORPORATION
Industrial and Business Products Merchandising Division:
PIONEER DIGITAL TECHNOLOGIES, INC.
Broadband Applications Division: 2210 West Olive Avenue, 2nd Floor, Burbank, CA 91506-2626, U.S.A. TEL: 1-818-295-6621
PIONEER NEW MEDIA TECHNOLOGIES, INC.
Cable and Broadcast Systems Division:
PIONEER ELECTRONICS OF CANADA, INC.
Industrial Products Department:
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
8
CHECK
CABLE
IN
2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: 1-310-952-2111
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-905-479-4411
178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL:61-39-586-6300
253 Alexandra Road #04-01, Singapore 159936
LIGHTNING PROTECTION CIRCUIT
The BD-V3000 features a lightning protection
circuit. During a lightning storm, this circuit may
activate to protect the rest of the circuit from
damage. If this occurs, the terminal will appear to
not work at all. To restore operation, simply unplug
the unit's AC power cord for at least one minute,
and plug it in again.
PowerKEY
PowerKEY is a registered trademark, and the
PowerKEY design is a trademark, of Scientific-
Atlanta, Inc.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
Printed in Singapore <BRB1058-A>
Published by Pioneer Corporation.
Copyright © 2000 Pioneer Corporation.
All rights reserved.
TEL: 65-472-1111