- ページ 15
レシーバー Pioneer VSX-330-KのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-330-K 36 ページ。
Pioneer VSX-330-K にも： クイック・スタート・マニュアル (25 ページ)
ページを印刷する
2
2
Connecting your component with no HDMI terminal
This diagram shows connections of a TV and DVD player (or other
playback component) with no HDMI terminal to the receiver.
Important
•
When the receiver and TV are connected by composite cable,
the OSD function allowing display of the receiver's settings,
operations, etc., on the TV's screen cannot be used. In this
case, watch the receiver's front panel display while
performing the various operations and making settings.
Note
•
You can only connect one component to the optical input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable, first,
switch to the DVD (DVD player) or SAT/CBL (set-top box),
then press
SIG SEL
to choose the audio signal O1
(OPTICAL1) (see
Selecting the audio input signal on page
•
You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the DVD (DVD player) or SAT/CBL (set-top box),
then press
SIG SEL
to choose the audio signal C1
(COAXIAL1) (see
Selecting the audio input signal on page
DVD player
Select one
VIDEO OUT
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
OPTICAL
R
L
18).
18).
OSD cannot be output.
15
Select one
VIDEO OUT
ANALOG AUDIO OUT
COAXIAL
R
L
VIDEO IN
TV
Connecting your equipment
Set-top box
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
This connection is
required in order
to listen to the
sound of the TV
over the receiver.
R
L
OPTICAL
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
Select one
4
6
31