- ページ 16

レシーバー Pioneer VSX-452のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-452 24 ページ。 Audio/video stereo receiver

ページを印刷する

MANUAL

TUNING

Each time the TUNING

button

"+"

or "-"

is pressed,

the tuning

frequency

changes

by one step, allowing you to find stations manually.

1. Use the BAND FM/AM

button to choose either FM or AM.

2. Press TUNING "'-'" or "" + "" button and release quickly.

• The tuning frequency will change by one stepeach time the button

ispressed. Pressas many times as necessary to tune in the desired

station. The TUNED indicator lights up when the station is tuned

in best.

• If you keep the TUNING button pressed after the AUTO TUNING

indicator

has gone out, the reception

frequency changes

continuously and stops when the button is released.

NOTE."

The TUNED indicator

may not light w_h broadcasts

received over long

distances,

or when

the broadcast

signals are extremely

weak.

Adjust

the volume

and tone as desired.

I PRESET TUNING

] FREQUENCY

PRESETTING

1. Tune in the desired station.

• See the section "DIRECT ACCESS TUNING" for information on

reception using the Direct Access Tuning mode.

• See the section "AUTO TUNING" for information on reception

using the Auto Tuning mode.

• See the section "MANUAL TUNING" for informationon reception

using the Manual Tuning mode.

In addition to station frequencies, the MPX MODE (AUTO/MONO)

can also be preset (FM only).

2. Press the MEMORY button.

3. Press the STATION CALL button into which you wish to preset

the station.

• Use the STATION CALL buttons (* 1 - "9, *0) to select a preset

channel. One press selects the 1 -- 10 range, two presses

LISTENING TO BROADCASTS

USING PRESET

TUNING

1. Press the STATION CALL button into which the desired station

has been preset.

• When the input selector is set to a function other than TUNER,

it will switch to the TUNER function automatically if one of the

STATION CALL buttons is pressed.

Tuning can be performed simply and accurately following the

above procedure.

2. Adjust the volume and tone as desired.

NO TE:

The contents of the STATION CALL button will be retained for several

days, even if the receiver power cord is unplugged.

ff a preset station has been erased, preset it again.

11 -- 20, and three presses 21 -- 30.

[Example] If you press button [_

Once -- 3 ch

Twice -- 13 ch

Three times -- 23 ch

Press a STATION CALL button within two seconds.

4. Repeat steps 1 to 3 to preset additional stations.

Last

station

memory

When the POWER switch is pressed to turn the power on, the last

station received before the power was previously turned off will be

tuned in again.

When the power is ON, if the BAND FM/AM button is pressed, the

last station received before the BAND FM/AM button was previously

Total of 30 AM and FM stations may be preset. When you store

a new preset, it takes the place of the previously stored station

(if any).

pressed will be tuned in again.

MEMORY

SCAN

Broadcast stations memorized under the STATION CALL buttons are

recalled in order at about five second intervals.

Set the input selector to TUNER, and press the remote control SCAN

button.

When you aretuned into a broadcast station you want, press the SCAN

button once more. This stops memory scan.

RECEIVING FM SlMULCAST TV PROGRAMS

By combining a "IV set and a VCR (or TV tuner), you can receive FM

simulcast rv programs (stereo TV sound transmitted from an FM radio

station] while viewing the video portion on your TV.

1. Select the desired TV program with the TV set.

2. Tune in the desired FM simulceet TV program on the receiver.

3. Adjust the volume and tone controls as desired.