- ページ 29
レシーバー Pioneer VSX-C302-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-C302-S 43 ページ。 Audio/video multi-channel receiver
ページを印刷する
Using other functions
Resetting the system
Use this feature to reset the system to its factory default
settings.
RECEIVER
DISC NAVIGATOR
ROOM SETUP
1
Press RECEIVER.
2
In standby, press ROOM SETUP and SYSTEM
SETUP at the same time.
The display prompts you to confirm.
3
Within 5 seconds, press
The display shows OK?.
4
Within 5 seconds, press
The receiver should now be reset.
Note
• If the receiver is disconnected from the power outlet
for more than a month it will reset to the default
settings.
• The above reset doesn't affect the presets that you
have programmed into the remote control (see Using
the remote control with other components on
page 34).
SYSTEM SETUP
TUNE
TUNE
.
.
Default receiver settings
The table below shows the factory default settings. When
you reset the system, the receiver reverts to these
defaults (see Resetting the system above).
Setting type
Default setting
DVD
Input
Master volume
– – – dB (no sound)
AUTO
Listening mode
STEREO
Listening mode (w/
headphones)
NATURAL
Sound mode
Dialog
OFF
Virtual Surround Back OFF
AUTO
Input signal select
Speakers (Front,
Automatically sensed
Center, Surround)
Setting
Subwoofer setting
200 Hz
0 dB
LFE Attenuator
Front speaker distance 2.0 m
Center speaker
2.0 m
distance
2.0 m
Surround speaker
distance
OFF
Dynamic Range
Control
ch1
Dual Mono
OFF (all inputs)
Input Attenuator
DVD(TV/SAT) COAX
DVD
jack assignment
TV/SAT(DVD) OPT1
TV/SAT
jack assignment
Front: 0 dB
Channel levels
Center: 0 dB
Surround: 0 dB
Subwoofer: 0 dB
Room Setup
M / MID
OFF
SR+
Note
• The default settings for the remote control to control
other components can be found in Using the remote
control with other components on page 34.
Page ref.
Page 24
(all inputs)
Page 24
(all inputs)
Page 25
Page 25
Page 25
Page 28
Page 30
Page 30
Page 31
Page 31
Page 31
Page 31
Page 31
Page 31
Page 31
Page 31
Page 31
Page 33
Page 22
Page 32
08
29
En