- ページ 5

レシーバー Pioneer XC-HM81-SのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer XC-HM81-S 33 ページ。 Network cd receiver system
Pioneer XC-HM81-S にも：取扱説明書 (42 ページ)

ページを印刷する

Connecting to network

Connecting this receiver using

wired LAN

1. Be sure your router supports DHCP server

function.

2. Use the LAN cable to connect this receiver

and your router.

3. Plug the power cord into an AC outlet.

Connecting this receiver using

wireless LAN

A: Connecting to a router with WPS-

PBC function

1. Plug the power cord into an AC outlet.

Press  STANDBY/ON.

2. Press NETWORK SETUP on the remote

control.

3. Select Network Setting WPS.

4. Useto select PBC (Push Button

Conﬁ guration) and then press ENTER.

5. Press the WPS button on the router.

If the connection does not succeed, return to

step 3 and select PIN Input.

For details, refer to Operating Instructions on

the CD-ROM.

PBC (Push Button Conﬁ guration)

• The wireless connection setting is automatically

conﬁ gured by pressing the WPS button on the

WPS compatible wireless LAN device.

C: Connection settings using an iOS

device

You can apply iPod/iPhone/iPad (iOS device

with iOS ver 5.0 or later)'s Wi-Fi settings to

this receiver.

1. Be sure the LAN cable is not connected to

the receiver.

2. Unlock your iPod/iPhone/iPad that Wi-Fi

connection is completed.

3. Plug the power cord into an AC outlet.

Press  STANDBY/ON.

4. Press iPod or USB on the remote control.

If you press iPod, connect iPod/iPhone to the

docking station. If you press USB, connect

the iOS device to the USB/iPod/iPhone/iPad

terminal.

5. Press SETUP.

6. Select Network Setting  Network

Conﬁ guration  Wireless  iOS Device

and then press ENTER.

7. Tap Allow on iPod/iPhone/iPad.

Share Wi-Fi Settings?

The Wi-Fi settings of your iPod/iPhone/iPad

are applied to the receiver.

B: Connecting to a router without

WPS-PBC function

This section describes how to set the

network connection using Safari browser

on a Macintosh computer. Be sure your

computer is equipped with wireless LAN

function. Settings can be performed from the

Web browser of the computer.

1. Be sure the LAN cable is not connected to

the receiver.

2. Plug the power cord into an AC outlet.

Press STANDBY/ON.

3. Press NETWORKSETUP on the remote

control.

4. Select Network Setting Network

Conﬁ guration  Wireless  Web Control.

5. Select Start OK.

The receiver restarts. Change settings on

Web Control on your computer.

6. Select Pioneer Setup (this receiver) in the

available wireless network connections on

your computer.

SSID is displayed as Pioneer Setup:xxxxxx.

"xxxxxx" is the lower three bytes of the MAC

address.

• You can change this receiver's network settings

via Safari browser.

• The setting for the network has been conﬁ rmed

for Mac OS X 10.7 and Safari 5.1.

Firmware Update using Safari

browser

You can update this receiver's ﬁ rmware via

Safari browser. Download the latest ﬁ rmware

at Pioneer website.

1. Be sure this receiver and your computer

are connected to the same wired or

wireless network.

2. Launch Safari on your computer.

3. Press Bookmark icon. Click Bonjour list

(a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP

address "http://(the receiver's IP address)"

from Safari.

If you use X-HM71 or X-HM81, XC-HM71

or XC-HM81 is displayed as the receiver's

name.

Ignore

4. Click Firmware Update.

XX.XX

:xxxxxx

000001

000002

000003

1.11

s1000

7. Launch Safari on your computer.

8. Press Bookmark icon. Click Bonjour list

(a), and then select this receiver's name

(Friendly Name) (b) in Bookmark.

If Bonjour list is not displayed, access the IP

address "http://192.168.1.1/" from Safari.

If you use X-HM71 or X-HM81, XC-HM71

or XC-HM81 is displayed as the receiver's

name.

9. Click Network Conﬁ guration. Select Auto

and then press OK.

10. Setup the network settings manually and

then press Apply.

If SSID is not displayed, return to step 9

and select Manual.

The receiver restarts and the new network

settings are applied to the receiver.

5. Press Start.

The ﬁ rmware update prepare screen is

displayed. If the screen does not switch

automatically, click Click here.

6. Browse the latest ﬁ rmware on your

computer (a) and then press Upload (b).

The conﬁ rmation screen is displayed.

If you continue the ﬁ rmware update, press

Yes. Once the ﬁ rmware update process

starts, you can't stop it.

Wait until the ﬁ le is uploaded (about one

minute may be required depending on your

LAN connection environment).

S1000

BCO_1000.fw

7. The ﬁ rmware upload status screen is

displayed.

"The upload process ﬁ nished successfully."

will be shown when the update is completed.

Unplug the the power cord from the AC outlet

after the update is completed.

BCO_1000.fw

• The setting for the network has been conﬁ rmed

for Mac OS X 10.7 and Safari 5.1.