- ページ 26

ステレオ・レシーバー Pioneer AVH-190DVDのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVH-190DVD 45 ページ。 Dvd rds av receiver
Pioneer AVH-190DVD にも: オーナーズマニュアル (49 ページ), クイック・スタート・マニュアル (33 ページ), 操作マニュアル (38 ページ), インストレーション・マニュアル (45 ページ)

Pioneer AVH-190DVD オーナーズマニュアル

Audio adjustments

Displaying the "Audio" setting
screen
1 Press
.
2 Touch
, and then
.
The "Audio" setting screen appears.

Using fader/balance adjustment

p This function is available when "Rear Speaker Output" is
set to "Full", and "Preout" is set to "Rear".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Fader/Balance].
3 Touch
or
to adjust the front/rear speaker
balance.
4 Touch
or
to adjust the left/right speaker
balance.
p "Front15" to "Rear15" is displayed as the front/rear speaker
balance moves from the front to rear.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "F/R 0 L/R 0".
 You can also set the fader/balance by touching
the point on the displayed table.

Using balance adjustment

p This function is available when "Rear Speaker Output" and
"Preout" are set to "Subwoofer Settings".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Balance].
3 Touch
or
to adjust the left/right speaker
balance.
p "Left15" to "Right15" is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is "L/R 0".
 You can also set the balance by touching the point
on the displayed table.
26

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source you want to adjust.
2 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
3 Touch [Source Level Adjuster].
4 Touch
or
to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p "+4" to "–4" is displayed as the source volume is increased
or decreased.
p The default setting is "0".

Adjusting loudness

This function compensates for deficiencies in the low-frequency
and high-frequency ranges at low volume.
p This function is not available while you make or receive a call
using the hands-free function.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Loudness].
3 Touch the item.
The following items are available:
Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Subwoofer] to switch "On" (default) or
"Off".
Adjusting the subwoofer
settings
p This function is available only when "Subwoofer" is "On".
 Using the subwoofer output on page 26
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Subwoofer Settings].
3 Touch
or
to turn the subwoofer phase
to normal or reverse.
4 Touch
or
to adjust the subwoofer level
between -24 and 6.
5 Touch
or
to adjust the subwoofer
frequency.
The following items are available:
80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.
Switching the rear speaker
output
1 Turn the source off.
2 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
3 Touch [Rear Speaker Output].
4 Touch to switch "Full" (default) or
"Subwoofer".
 When this function is set to "Subwoofer
Settings", "Preout" is fixed to "Subwoofer
Settings".

Switching the RCA rear output

When "Rear Speaker Output" is set to "Subwoofer Settings",
this setting is fixed to "Subwoofer Settings".
1 Display the "Audio" setting screen.
 Displaying the "Audio" setting screen on page 26
2 Touch [Preout] to switch "Subwoofer
Settings"(default) or "Rear".