- ページ 19

ステレオ・レシーバー Pioneer AVH-A100DVDのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVH-A100DVD 30 ページ。 Dvd rds av receiver

ページを印刷する

Menu Item

Description

[Colour]*

Adjust the colour saturation.

[-24] to [+24]

[Hue]*

Adjust the tone of colour (which colour is emphasised, red,

[-24] to [+24]

or green).

[Dimmer]

Adjust the brightness of the display.

[+1] to [+48]

* With some pictures, you cannot adjust [Hue] and [Colour].

NOTES

• The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's

headlights are off (daytime) and on (nighttime).

• [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer

Settings].

• [Dimmer] can be changed the setting or the time to switch it to on or off (page 18).

• The picture adjustment may not be available with some rear view cameras.

• The setting contents can be memorised separately.

Theme settings

Menu Item

Description

[Background]

Select the wall paper from the preset items in this product.

[Home] [AV]

The wall paper can be set from selections for the top menu

screen and AV operation screen.

Preset Display

Select the desired preset background display.

(off )

Hides the background display.

[Illumination]*

Select an illumination colour from the colour list or create a

defined colour.

Coloured Keys

Select the desired preset colour.

(custom)

Displays the screen to customise the illumination colour.

To customise the defined colour, touch

to adjust the brightness and the level of red, green

and blue to create favourite colour.

To store the customised colour in the memory, touch and

hold [Memo], and the customised colour will be available

at the next illumination setting by pressing

TIP

You can also adjust the colour tone by dragging the colour bar.

(rainbow)

Shifts gradually between the preset colours in sequence.

[Theme]*

Select the theme colour.

* You can preview the top menu screen or the AV operation screen by touching [Home] or [AV]

respectively.

Audio settings

The menu items vary according to the source. Some of the menu items become

unavailable when the volume is set to mute.

Menu Item

[Graphic EQ]

[Super Bass] [Powerful]

[Natural] [Vocal] [Flat]

[Custom1] [Custom2]

[Fader/Balance]

[Source Level Adjuster]

[-4] to [+4]

then touch

Description

Select or customise the equaliser curve.

Select a curve that you want to use as the basis of customising

then touch the frequency that you want to adjust.

TIPS

• If you make adjustments when a curve [Super Bass], [Powerful],

[Natural], [Vocal], or [Flat] is selected, the equaliser curve settings

will be changed to [Custom1] mandatorily.

• If you make adjustments when the [Custom2] curve is selected

for example, the [Custom2] curve will be updated.

• [Custom1] and [Custom2] curves can be created common to all sources.

Touch

to adjust the front/rear speaker balance. Set

[Front] and [Rear] to [0] when using a dual speaker system.

Touch

to adjust the left/right speaker balance.

TIP

You can also set the value by dragging the point on the displayed table.

NOTE

Only the fader can be adjusted when [Rear] is selected as the

speaker mode.

Adjust the volume level of each source to prevent radical

changes in volume when switching between sources other

than FM.

Touch

to adjust the source volume after

comparing the FM tuner volume level with the level of the

source.

TIP

If you directly touch the area where the cursor can be moved, the

SLA (source level adjustment) setting will be changed to the value

of the touched point.

NOTES

• Settings are based on the FM tuner volume level, which remains

unchanged.

• This function is not available when the FM tuner is selected as

the AV source.