- ページ 15

ステレオ・レシーバー Pioneer VSX-605SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-605S 37 ページ。 Audio/video stereo receiver
Pioneer VSX-605S にも：取扱説明書 (37 ページ)

ページを印刷する

FRONT PANEL FACILITIES

@ DOLBY PRO LOGIC button *

Switches DOLBY PRO LOGIC SURROUND on and off.

(8) SUPER BASS button *

Press this button when you want to boost the bass.

DOLBY 3CH LOGIC button *

Seiect this setting when stereo-source regeneration and rear

speakers are not connected and you wish to use the front L, front

R, and center speakers to enjoy audio/visual material bearing

the OCiGemramees} mark.

40 MASTER VOLUME control

Use it to simultaneously adjust the sound volume from the front,

center, and rear speakers.

() VIDEO INPUT selector button

Press when performing playback on a VCR connected to VIDEO

INPUT jacks on the front panel.

12 RESET button

Use this when

normal! operation is not possible because of

external influences such as static electricity or lightning, or when

operations are not functioning even when operation buttons are

pressed.

Press this button

to return

to normal

operating

conditions.

(3 PHONES jack

Connect the plug on your headphones to this jack. Set SPEAKERS

A and 8 switches to OFF if you want to cut the sound from the

speakers and listen to it only through the headphones.

44 VIDEO INPUT jacks

VIDEO components such as a VCR or TV camera, etc. can be

connected.

45 Display section

See page 16.

46 Tuner operation buttons

FM/AM button:

Use this to switch between FM and AM frequency band reception.

MPX MODE button:

Use to select the auto stereo mode or monaural mode when

listening to FM broadcasts. The monaural

mode has been

selected when the MONO

indicator in the display section is lit.

Auto stereo mode

Normally, leave in this mode for reception. When a stereo FM

broadcast is received, it wil! be automatically reproduced in

stereo,

Monaural mode

When receiving distant stations or stations with weak broadcast

signals, the input signal may be weak, thus resulting in increased

noise during FM stereo broadcasts. In this event, setting the

receiver to the monaural mode will reduce the noise. tn this case,

however, FM stereo broadcasts will be reproduced in monaural

sound.

NOTE:

This button has no effect on reception of AM broadcasts.

@ SELECT button

Press this button to switch to the station mode, Then you can

turn the Multi-iog to select a station.

When in the Frequency mode, tuning the Multi-jog raises or

jowers the frequency,

Serves as a button for forwarding to the left digit («) when

inputting CD titles, (See page 27.)

48 GUI MODE button

Switches GU! MODE en and off.

9 Multi-jog

Use during tuner operation to select frequencies and station

numbers.

During GUI operation,

use to move the on-screen

cursor,

Serves as a jog for selecting characters when inputting CD titles.

{See page 27.}

@ ENTER button

Press this button when you are in the frequency preset mode,

and the displayed frequency is memorized in the selected station.

{Station indications stop flashing and stay lit.)

When GUI is ON, press to execute an operation selected with

the multi-jog 43.

Use this button when you input a title of CD as well, (See page

27)

2i MEMORY button

Press this button to switch to the frequency preset mode.

(When GUI is ON, it does not operate.)

Serves as a button for forwarding to the right digit (») when

inputting CO titles. (See page 27.)

22 BASS control

Use to adjust the low-frequency level. Turn clockwise to boost

bass, and counterclockwise to attenuate bass,

@ TREBLE control

Use to adjust the high-frequency level. Turn clockwise to boost

treble, and counterclockwise to attenuate treble.

@ BALANCE control

Use to adjust the sound volume balance between left and right

speakers.

'Decreases the sound on the right side.

:Decreases the sound on the left side.

Usually, left and right volume Jevels should be the same.

* Setting is memorized

separately for each input selector

button.