- ページ 4

ステレオ・レシーバー Pioneer VSX-824-KのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer VSX-824-K 49 ページ。 Av receiver
Pioneer VSX-824-K にも：クイック・スタート・マニュアル (21 ページ), クイック・スタート・マニュアル (21 ページ), サービスマニュアル (11 ページ)

ページを印刷する

Initial Setup

Before you start

Put the batteries in the remote control.

The batteries included with the unit are to check initial

operations; they may not last over a long period. We

recommend using alkaline batteries that have a longer life.

Switch on the receiver and your TV.

VSX-424/VSX-329

RECEIVER

SLEEP

SOURCE

CONTROL

RECEIVER

INPUT SELECT

INPUT

DVD

Switch the TV input so that it connects to the

receiver.

Turn the subwoofer on and turn up the

volume.

CAUTION

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat, explode

or catch fire. It can also reduce the life or performance of

batteries.

• When inserting the batteries, make sure not to damage

the springs on the battery's * terminals. This can cause

batteries to leak or overheat.

• When disposing of used batteries, please comply with

governmental regulations or environmental public

institution's rules that apply in your country/area.

Automatically setting up for surround sound (MCACC)

(VSX-824/VSX-529/VSX-424)

The Auto Multi-Channel ACoustic Calibration (MCACC) setup

uses the supplied setup microphone to measure and analyze

the test tone that is outputted by the speakers. This setup

enables automatic high precision measuring and settings;

utilizing it will create an optimum user listening environment.

Important

• Measure in a quiet environment.

• If you have a tripod, use it to place the microphone so

that it's about ear level at your normal listening position.

Otherwise, place the microphone at ear level using a table

or a chair.

• Accurate measurements may not be possible if there are

VSX-824/VSX-529

obstacles between the speakers and the listening position

(microphone).

STANDBY/ON

SLEEP

SOURCE

• When measuring, step away from the listening position,

and operate using the remote control from the external

RECEIVER SIGNAL SEL

CTRL

S.SEL

ECO

INPUT

side of all the speakers.

Connect the supplied setup microphone.

GAME

HDMI

Microphone

Tripod

Press BD button on the remote control to

switch to BD entry.

Press RECEIVER CTRL (VSX-824/VSX-529),

(VSX-424/VSX-329) on the remote

RECEIVER

control, then press the HOME MENU button.

The Home Menu appears on your TV.

Select 'Auto MCACC' from the Home Menu,

then press ENTER.

Automatic measuring will start.

Hom e Menu

1 . Aut o MC AC C

2 . Manual SP Set up

3 . Input Assi gn

4. Aut o Power Down

5. HD MI Set up

6. Net work St andby

7. MH L Set up

8. OSD Setup

• Measuring will take about 3 to 12 minutes.

MCACC

Follow the instructions on-screen.

SETUP MIC

• Automatic setting is complete when the Home Menu

screen appears.

• If the power is cut off, the protection circuit that activates

when the naked wires of the cable cord is touching the

rear panel or when the naked  and * cords are touching

each other may be activated.

Twist back the cable cords of the speakers to the normal

position, and connect, making sure that the naked cable

cord cannot be seen from outside the terminal. Do the

same for the connections on the speaker side.

• If ERR is displayed, check to make sure that the speakers

are connected correctly.

Make sure the setup microphone is

disconnected.

1 . Aut o MC ACC

N ow A nalyz ing

Surround A nalyz ing

Speaker S yst em

X.Over

Speaker D i st ance

Channel Level

Acousti c Cal EQ

R eturn

VSX-824