- ページ 5

ステレオ・レシーバー Pioneer VSX-922-KのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer VSX-922-K 45 ページ。 2012
Pioneer VSX-922-K にも：リファレンス・マニュアル (37 ページ), サービスマニュアル (7 ページ)

ページを印刷する

1. Initial Setup

Initial Setup

Before you start

Put the batteries in the remote control.

The batteries included with the unit are to check initial

operations; they may not last over a long period. We

recommend using alkaline batteries that have a longer life.

Switch on the receiver and your TV.

ALL ZONE STBY

RECEIVER

SOURCE

DISCRETE ON

RCU SETUP

BDR

DVD

DVR

HDMI

Switch the TV input so that it connects to the

receiver.

Turn the subwoofer on and turn up the volume.

WARNING

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a heater.

This can cause batteries to leak, overheat, explode or catch

fire. It can also reduce the life or performance of batteries.

CAUTION

• When disposing of used batteries, please comply with

governmental regulations or environmental public institu-

tion's rules that apply in your country/area.

Canceling the demo display

The display on the front panel shows various information (demo

displays) when the receiver is not operating.

You can turn off the demo display.

"Canceling the demo display"

• The demo mode is canceled automatically when the Auto

MCACC setup is performed (see below).

Automatically setting up for surround sound (MCACC)

The Auto Multi-Channel Acoustic Calibration (MCACC) setup

uses the supplied setup microphone to measure and analyze

the test tone that is outputted by the speakers. This setup

enables automatic high precision measuring and settings;

utilizing it will create an optimum user listening environment.

Important

• Measure in a quiet environment.

• If you have a tripod, use it to place the microphone so

that it's about ear level at your normal listening position.

Otherwise, place the microphone at ear level using a table

or a chair.

• Accurate measurements may not be possible if there are

obstacles between the speakers and the listening position

(microphone).

• When measuring, step away from the listening position,

and operate using the remote control from the external

side of all the speakers.

Connect the supplied setup microphone.

CONTROL

ON / OFF

MCACC

SETUP MIC

Microphone

Tripod

The Full Auto MCACC screen appears on your TV.

1a.Full Auto MCACC

A/V RECEIVER

Speaker System

: Normal(SB/FH)

EQ Type

: SYMMETRY

MCACC

: M1.MEMORY 1

THX Speaker

START

Exit

Return

Press

on the remote control, then

RECEIVER

press the ENTER button.

• Automatic measuring will start.

• Measuring will take about 3 to 12 minutes.

Follow the instructions on-screen.

• Automatic setting is complete when the Home Menu

screen appears.

HOME MENU

A/V RECEIVER

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

5. Network Information

6. Operation Mode Setup

Exit

Return

Make sure the setup microphone is

disconnected.

• Attach the front cover as shown in the following

illustration.

iPod

iPhone

USB

iPad

Canceling the Auto Power Down

If no operation is performed for a certain amount of time with

no audio or video signal being input, the receiver's power turns

off automatically. The automatic power-off timer is set to 30

minutes under factory settings, and the timing can be changed

or the power-off function switched off altogether.

"Auto Power Down"