- ページ 4

ステレオ・レシーバー Pioneer VSX-9700SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-9700S 48 ページ。

ページを印刷する

BEFORE OPERATING, ADJUST THE POSITION OF THESE SWITCHES

TWO VOLTAGE SELECTOR SWITCHES

Only multi-voltage models are provided with these switches. U.S.,

Canadian, European, U.K. and Australian models are not provided with

these switches.

Mains voltages in Saudi Arabia are

127 V and 220 V only. Never use

this model with 110 V setting in Saudi Arabia.

The line voltage selector switches are on the rear panel. Before your

model is shipped from the factory, these switches are set to the power

requirements of the destination. Check that they are set properly before

plugging the power cord into the household wall socket. If the voltage

is not properly set or if you move to an area where the voltage

requirements differ, adjust the selector switches as follows.

1. Use a medium-size screwdriver.

2. First, insert a screwdriver in the groove of the voltage selector at

the right, and adjust so that the tip of the groove points to the voltage

value of your area.

3. Next, insert a screwdriver in the groove of the voltage selector at

the left and adjust until the voltage is the same as at the right.

TWO

VOLTAGE

SELECTORS:

| CAUTION: TWO VOLTAGE SELECTORS

CHANNEL STEP/FM DE EMPHASIS SWITCH

(Not available on U.S. and Canadian models)

The unit has been factory preset to the channel allocation and de-

emphasis value for the area in which it is to be sold. If these values are

set incorrectly, the frequency display may stop at the wrong frequency,

or sound may be distorted, resulting in an inability to reproduce reception

signals at their proper sound quality. For this reason, be sure to confirm

that the values are set correctly before first using the unit.

[100kHz/10kHz/75us] position:

Set to this position for areas with an FM reception step of 100kHz, AM

10kHz, and de-emphasis 75ys.

[50kHz/9kHz/50xzs} position:

Set to this position, for areas with an FM reception step of 50kHz, AM

9kHz, and de-emphasis 50s.

NOTE:

When unsure about the channel allocation and de-emphasis values for

your area, consult your dealer for correct information.

CHANNEL

STEP

DE- EMPHASIS

bam |

220V

240V

1tOV

120V~127V

110V

120V—127V

Medium-size screwdriver

NOTE:

Both switches must be in the same switch

. setting; otherwise, unit can be damaged.

VOLTAGE

SELECTORS

BLOCK DIAGRAM

[AUDIO]

ac 110v | AC120 | ac 220v

220V

110V.

SOkHz

100kHz

{SOus

/T5us

<4qFm

OkHz

10kHz

<q AM

AC 240V

220V

240V