- ページ 23

ステレオ・レシーバー Pioneer VSX-D6025のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSX-D6025 44 ページ。

ページを印刷する

MANUAL TUNING

Each time the TUNING button "+" or ''—" is pressed, the tuning

frequency changes by one step, allowing you to find stations manually.

PRESET TUNING

FREQUENCY PRESETTING AND CUSTOM

MEMORY SELECTION

At the same time, you can also memorize stations under the following

five different genre names according to the material played on the station

(Custom memory).

The five following genres are available.

ROCK, POP, JAZZ, NEWS, OTHER

[Frequency presetting]

1. Tune in the desired station.

reception using the Direct Access Tuning mode.

¢ See the section ''AUTO TUNING" for information on reception

using the Auto Tuning mode.

using the Manual Tuning mode.

In addition to station frequencies, the MPX MODE (AUTO/MONO)

can also be preset.

2. Press the MEMORY

button.

3. Press the STATION CALL button into which you wish to preset

the station.

¢ Use the STATION CALL buttons (*1 — *9, *O) to select a preset

channel. One press selects the 1 — 10 range, two presses

11 —

20, and three presses 21 — 30.

{Example] If you press button

Once — 3ch

Twice — 13 ch

Three times — 23 ch

Press a STATION CALL button within two seconds.

4. Repeat steps 1 to 3 to preset additional stations.

Total of 30 AM and FM stations may be preset. When you store a

new preset, it takes the place of the previously stored station (if any).

1. Use the BAND FM/AM button to choose either FM or AM.

2. Select Manual Tuning with the TUNING MODE button (the AUTO

TUNING indicator goes out).

3. Press the ''+'' or ''-'' of the TUNING button as necessary to set

to the frequency of the desired station.

¢ Each time the button is pressed, the tuning frequency will change

by one step in the direction corresponding to the button pressed.

If the

button

is kept

depressed,

the

frequency

changes

continuously in sequence.

¢ When a station is received, the

indicator will light up.

NOTE:

The [TUNED |indicator may not light with broadcasts received over long

distances, or when the broadcast signals are extremely weak.

4, Adjust the volume and tone as desired.

{Custom memory selection]

1. Select the station number

you want to memorize

with the

STATION CALL buttons.

2. Press the MEMORY button.

3. Display the desired genre with the CUSTOM MEMO SEL button.

4. When entering another station number into custom memory,

repeat steps 1 to 3.

LISTENING TO BROADCASTS USING PRESET

TUNING

1. Press the STATION CALL button into which the desired station

has been preset.

® When the INPUT SELECTOR

is set to a function other than

TUNER, it will switch to the TUNER function automatically if one

of the STATION CALL buttons is pressed.

Tuning can be performed simply and accurately following the

above procedure.

2. Adjust the volume and tone as desired.

NOTE:

The contents of the

STATION CALL button will be retained for several

days, even if the receiver power cord is unplugged.

if a preset station has been erased, preset it again.