- ページ 33

ステレオ・レシーバー Pioneer XC-L77のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Pioneer XC-L77 48 ページ。 Stereo cd receiver; speaker system; stereo cassette deck

ページを印刷する

Setting the Reverse Mode

Current reverse mode is

'endless'

Tape playing in 'reverse' mode

Making Tape Recordings

The tape deck can play both sides of a tape without you having to take the cassette out

and turning it over by hand. This feature is called auto-reverse (because to play the

other side of the tape, the tape travels in the opposite direction).

You can switch sides any time while playing a tape by pressing the

page 20 for how to use all the basic playback controls). The reverse mode, however,

tells the deck what to do when it reaches the end of the tape on the side it's playing.

There are three modes:

– Play the tape round and round continuously: "

•

ENDLESS

– Play one side, then stop: O

•

ONE

WAY

– Play both sides then stop: [

•

REVERSE

AUX/CD-R

SOUND

STANDBY/ ON

Press MENU and select REVERSE MODE.

Remember: switch between menu options using the $ and ›

buttons; select the option by pressing

Select a reverse mode.

Three options are available:

ENDLESS

? -

REVERSE

ONE

Remember: switch between menu options using the $ and ›

buttons; select the option by pressing

Note: In endless mode, the deck only plays the tape through 16 times before it stops

automatically. If you start playback in the reverse direction in reverse mode, the tape will

stop after it reaches the end of that side (i.e, it won't play in the forward direction.)

You can make tape recordings from any other component in the system, and also from

an external component connected to the AUX/CD-R inputs. If you're recording from

CD or the optional MD recorder, it's usually most convenient to use the synchro-

recording mode. This makes the process largely automatic with the system starting

and stopping the recording for you. Detailed instructions for this are below. If you're

recording from the tuner or from a component connected to the AUX/CD-R inputs, use

the manual recording mode explained on page 36.

Once recording has started, you can't switch to another component until either the

recording has stopped, or you pause the recording. So, for example, you can't switch

over to the tuner while you're recording a CD.

7 Using the Tape Deck

SET

DISPLAY

SET

TAPE

TIMER/

! —

REC

CHARACTER

CANCEL

SET

? ›

WAY

SET

button (see

TAPE

›

VOL

+ ⁄