- ページ 7

アンプ Pioneer A-35R - Elite AmplifierのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer A-35R - Elite Amplifier 24 ページ。 Pioneer integrated amplifier,disc compact disc player specification sheet
Pioneer A-35R - Elite Amplifier にも：仕様書 (1 ページ)

ページを印刷する

PANEL FACILITIES

[ FRONT PANEL ]

STEREO AMPLIFIER

POWER

—

OFF

A SPEAKERS B

BASS

PHONES

–

= -

POWER (— OFF/_ ON) switch

Press to turn power to the unit ON and OFF.

This unit cannot be turned ON and OFF using the remote

control unit.

REMOTE CONTROL SENSOR window

VOLUME control

Use to adjust the volume level.

INPUT SELECTOR knob/indicators

Turn the knob clockwise or counterclockwise so that the

indicator lights for your desired input source. Turning the knob

clockwise causes the lit indicator to right. Turning counter-

clockwise causes it to left.

: For compact disc playback with a CD player.

TUNER

: For AM or FM broadcast reception with a

tuner.

PHONO

: For record playback with a turntable.

LINE/SB

: Set to this position when listening to the

program from a component connected to the

LINE/SURROUND BACK terminals.

TAPE 1/

: For playback with a cassette deck, CD

CD-R/MD

recorder or MD recorder connected to TAPE1/

CD-R/MD terminals.

z¿≤.B

REFERENCE STEREO AMPLIFIER

TREBLE

SB MODE

–

VOLUME

BALANCE

DIRECT

MIN

MAX

TAPE 2 MONITOR button/indicator

Use when there is an adaptor component (graphic equalizer,

etc.) or cassette deck connected to the TAPE2 MONITOR

terminals.

On : Indicator lights when using the adaptor component or

listening to the cassette deck.

Off : Indicator goes off when not in use.

NOTES:

÷ When no connections are made to the TAPE2 MONITOR

terminals, or when they are not in use, be sure to set this

switch to the off position. (No sound will be heard if it is set

to the on position.)

÷ When the TAPE2 MONITOR indicator is on and the INPUT

SELECTOR knob is not set to TAPE1/CD-R/MD, the signals

which are input through TAPE 2 MONITOR are then output

at TAPE1/CD-R/MD REC OUT.

BALANCE control

Should normally be left in the center position. Adjust balance

if the sound is louder from one of the speakers. If the right side

is louder, turn toward the L (left) position and if the left side is

louder, turn toward the R (right) position.

NOTE:

This control does not operate when the DIRECT button is in

the on position.

LINE

TAPE 1/

TAPE 2

TUNER

PHONO

MONITOR

CD-R/MD

INPUT SELECTOR

TAPE 2

MONITOR

Direct Energy MOS