- ページ 23

アンプ Pioneer A-605R-GのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer A-605R-G 25 ページ。
Pioneer A-605R-G にも：サービスマニュアル (26 ページ)

ページを印刷する

Use this button when you do not wish to pass the output from

input terminal equipment through the various frequency adjust-

ing circuits (BASS, TREBLE, BALANCE, LOUDNESS).

On _ : The indicator lights. The signals input through the input

terminals are reproduced without passing through the

various frequency adjusting circuits. This results in flat,

pure sound which is a more faithful reproduction of the

input source.

Off

: The indicator goes out. The signal passes through the

various frequency adjusting circuits.

@® REC SELECTOR switch (For TAPE 1/DAT terminals)

When this switch is set to a position other than SOURCE or OFF,

the equipment selected by the REC SELECTOR switch can be

recorded, irrespective of the INPUT SELECTOR

knob and the

DIRECT button settings (TAPE 1/DAT terminals).

SOURCE : To record from the equipment selected by the INPUT

SELECTOR knob.

OFF

: In this position, nothing from the REC terminals of

TAPE 1/DAT is output. Set to this position when not

recording; the cassette deck will be disconnected, im-

proving sound quality.

: To record from the equipment connected to the CD

terminals.

TUNER:

To record from the equipment connected to the

TUNER terminals.

NOTE:

The function selected using the INPUT SELECTOR knob will be

recorded irrespective of the position of the REC SELECTOR switch

(TAPE 2 MONITOR terminals).

@® BALANCE control

Should normally be left in the center position. Adjust the bal-

ance if the sound is louder from one of the speakers. If the right

side is louder, turn toward the L (left) position and if the left side

is louder, turn toward the R (right) position.

NOTE:

This control does not operate when the DIRECT button is in the

on position.

@ MUTING button/indicator (A-605R and A-505R only)

Use to temporarily lower sound volume.

On:

The VOLUME

indicator flashes. The sound volume is

lowered to one-tenth (-20dB).

Off

: The VOLUME

indicator lights. The sound will return to

its previous volume.

@ LOUDNESS button/indicator

Use when listening at low volume level.

On _ : The indicator lights. Boosts low and high frequencies to

give added punch to playback even at low volume level.

Off

: The indicator goes out. Should normally be left in this

position.

NOTE:

This button does not operate when the DIRECT button is in the

on position.

@ TREBLE tone control

Use to adjust the high-frequency tone. The center position is the

flat (normal) position. When tumed to the right, the high-frequency

tone is emphasized; when turned to the left, the high-frequency

tone is de-emphasized.

NOTE:

This control does not operate when the DIRECT button is in the

on position.

@ BASS tone control

Use to adjust the low-frequency tone. The center position is the

flat (normal) position. When turned to the right, the low-frequency

tone is emphasized; when turned to the left, the low-frequency

tone is de-emphasized.

NOTE:

This control does not operate when the DIRECT button is in the

on position.

@ SPEAKERS B selector button/indicator

Use this button to listen to the speaker system connected to the

SPEAKERS B terminals.

: The indicator lights. Sound is heard from the speaker

system.

Off

: The indicator goes out. No sound is heard from the

speaker system. Set to this position when listening

with headphones.

@ PHONES jack

When using headphones, insert the plug into this jack.

@® SPEAKERS A selector button/indicator

Use this button to listen to the speaker system connected to the

SPEAKERS A terminals.

: The indicator lights. Sound is heard from the speaker

system.

Off

: The indicator goes out. No sound is heard from the

speaker system. Set to this position when listening

with headphones.