- ページ 6
アンプ Pioneer GM-3400TのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer GM-3400T 17 ページ。 Bridgeable two-channel power amplifier
Pioneer GM-3400T にも： オーナーズマニュアル (41 ページ), オーナーズマニュアル (48 ページ)
ページを印刷する
Section
•
( Connecting the units
) (~----)
Before connecting the
amplifier
A
WARNING
•
Secure the wiring with cable clamps or adhe-
sive tape. To protect the wiring, wrap sections
in contact with metal parts in adhesive tape.
•
Never cut the insulation of the power supply
to feed power to other equipment. Current ca-
pacityof the wire is limited.
Connect male terminal of this wire to the sys-
tem remote control terminal of the car stereo
(SYSTEM REMOTE CONTROL),
The female
terminal can be connected to the auto-anten-
na relay control terminal. If the car stereo
lacks a system remote control terminal. con-
nect the male terminal to the power terminal
via the ignition switch.
®
Speaker output terminals
Please see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire on page 8.
@)
Fuse (30 A) x 2
@
Fuse (30 A)
x
2
@
Grommet
@ Rear side
®
Froflt side0
A
CAUTION
•
Never shorten any wires, the protection circuit
may malfunction.
•
Never ground speaker wire directly or band to-
gether multiple speakers' negative (8) lead
wires.
•
If the system remote control wire of the ampli-
fier is connected to the power terminal via the
ignition switch (12 V DC), the amplifier will re-
main on with the ignition whether the car
stereo is on or off, which may exhaust battery
if the engine is at rest or idling.
Connection diagram
~'~?I!j)~l
_ _..,
®
t""--_
t-@
CD
Special red battery wire
RD-223 (sold separately)
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive ((±») battery
terminal.
@ Ground wire (Black)
RD-223 (sold separately)
Connect to metal body or chassis.
®
Car stereo with RCA output jacks (sold sepa-
rately)
o
External output
®
Connecting wire with RCA pin plugs (sold se-
parately)
®
Speaker input terminal
Please see the following section for speaker
connection instructions. Refer to Connections
when using the speaker input wire on page 8,
m
RCA input jack
®
System remote control wire (sold separately)
m
En