- ページ 11

アンプ Pioneer GM-3500TのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer GM-3500T 37 ページ。 Bridgeable two-channel power amplifier
Pioneer GM-3500T にも：オーナーズマニュアル (14 ページ), オーナーズマニュアル (45 ページ)

ページを印刷する

Additional information

Specifications

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

Grounding system ................... Negative type

Current consumption ............ 15 A (at continuous power,

Average current drawn ......... 4 A (4 W for two channels)

Fuse ................................................ 25 A × 1

Dimensions (W × H × D) ... 289 mm × 62 mm ×

Weight .......................................... 2.0 kg (4.4 lbs)

Maximum power output ....... 400 W (200 W × 2)

Continuous power output ... 60 W × 2 (at 14.4 V, 4 W,

Load impedance ...................... 4 W (2 W to 8 W allowable)

Frequency response ............... 10 Hz to 70 kHz (+0 dB, –

Signal-to-noise ratio ............... 98 dB (IHF-A network)

Distortion ..................................... 0.05 % (10 W, 1 kHz)

Low pass filter:

Cut off frequency ........... 80 Hz

Cut off slope ..................... –12 dB/oct

Gain control:

RCA ...................................... 200 mV to 6.5 V

Speaker .............................. 0.8 V to 26 V

Maximum input level / impedance:

RCA ...................................... 6.5 V / 22 kW

Speaker .............................. 26 V / 22 kW

CEA2006 Specifications

Power output ............................. 60 W RMS × 2 Channels (at

S/N ratio ....................................... 80 dBA (reference: 1 W into

allowable)

4 W)

7 A (4 W for one channel)

219 mm

(11-3/8 in. × 2-1/2 in. ×

8-5/8 in.)

(Leads for wiring not in-

cluded)

20 Hz to 20 kHz, ≦ 1.0 % THD

+N)

185 W × 1 (at 14.4 V, 4 W

BRIDGE 1 kHz, ≦ 1.0 % THD

+N)

85 W × 2 (at 14.4 V, 2 W,

1 kHz, ≦ 1.0 % THD+N)

3 dB)

14.4 V, 4 W and ≦ 1 % THD

+N)

4 W)

Notes

! Specifications and the design are subject to

modifications without notice.

! The average current drawn is nearly the maxi-

mum current drawn by this unit when an

audio signal is input. Use this value when

working out total current drawn by multiple

power amplifiers.

Appendix