- ページ 5

アンプ Pioneer M-AX10のPDF 操作説明をオンラインで閲覧またはダウンロードできます。Pioneer M-AX10 20 ページ。 Dual-drive amplifier

PREPARATIONS

OPERATION

APPENDIX

• Choice of three speaker drive modes: bridge, dual and separate

High-power design with two 230 W / 6 Ω (DIN), 200 W / 6 Ω (FTC) channels in bridge mode, or four

110 W / 3 Ω (DIN), 90 W / 3 Ω (FTC) channels in dual and separate modes.

• With DAC (Digital Accurate Control) attenuator

Attenuation is achieved by switching trimmed high-precision resistors. There is no gang error

between the right and left channels, nor is there any increased impedance resulting from the

position of the attenuator, as is seen in conventional types. S/N is maximised and separation is

minimised.

In dual and bridge modes the DAC attenuator functions as a volume control, and in separate mode

as an attenuator (0 to -15 dB, in 0.5 dB steps). In either case, it facilitates adjustment in 31 stages.

• Hybrid brass stay construction

Highly rigid hybrid brass stays with high specific gravity impart greatly increased rigidity to the

chassis, permitting it to retain a power supply transformer, electrolytic capacitor, heat sink and

similar heavy items.

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Rear surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Front surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connecting and operating . . . . . . . . . . . . . . . . . . . . . . .10

Bridge connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Dual connection . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Separate connection . . . . . . . . . . . . . . . . . . . . . . . .14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TABLE OF CONTENTS