アンプ Pioneer SA-1060のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer SA-1060 11 ページ。

ページを印刷する

Operating

Instructions

STEREO AMPLIFIER

A-1060

Photograph shows BLACK finished model.

Thank you for buying this Pioneer product.

Please read through these operating instructions and then you

will know how to operate your model properly. After you have

finished reading the instructions,

put them away in a safe

place for future reference.

In accordance with the power and voltage requirements of dif-

fering areas, the following model names are used to designate

models with differing electrical specifications.

Models

HE, HEZ, NE,

NEZ

WE, WB, WP | a.c. 220—240 volts ~

S, S/G, SS

AC 110, 120, 220, 240 volts (Switchable voltage)

Line voltage

a.c. 220 volts ~

D, D/G

AC 120, 220, 240 volts (Switchable voltage)

R, R/G

| AC 110—120, 220—240 volts (Switchable voltage)

KU, KC

AC 120 volts

YP, YB

HB, HP

a.c. 240 volts ~

NOTES:

The model names are stamped on the packing case.

These operating instructions are prepared on the basis of the

model, and they can be used for other models.

Although the

design of the power plug and the power outlet shown may differ

from the actual one, the operating procedures are the same.

WARNING:

To preveENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CONNECTIONS.

20... .ccceseeceeeeentereresseenreraeteeees

PANEL FACILITIES

OPERATIONS

CONTENTS

LINE VOLTAGE SELECTOR SWITCH

Only

multi-voltage

models

are

provided

with

this

switch.

U.S.A., Canadian, European,

U.K., and Australian models are

not provided with this switch.

You will find the line voltage selector switch on the rear panel. This

switch has positions for

110 V, 120 V, 220 V and 240 V power sources.

Before your model is shipped from the factory, the switch is set to the

power

requirements

of the destination;

nevertheless,

you

should

check that it is set properly before plugging the power cord into the

AC outlet. If the voltage is not properly set or if you move to an area

where the voltage requirements differ, adjust the selector switch as

follows. Before adjusting disconnect the power cord.

1. Provide yourself with a medium size flat tip screwdriver.

2. Insert the screwdriver into the arrow on the voltage selector and

adjust so that the tip of the arrow points to the voltage value of

your area.

VOLTAGE SELECTOR

120V

240V

Medium size screw driver

IMPORTANT

NOTICE

[For U.S.A. and

Canadian models]

The serial number for this unit is Jocated on the rear panel.

Please write this serial number on your enclosed warranty card

and keep in a secure area. This is for your security.

SPEGIFICATIONS. ii dec cvs woe ces ae ata ais tee ven sais sas ones 9

TROUBLESHOOTING

...........cceececeer

eens ee eee eee 10

QMPIONEER'