ページを印刷する
CONNECTIONS
When connecting Pioneer system components, please refer to
the operating instructions for the audio rack.
CD player, audio channel
from video disc player or
video cassette recorder.
Speaker
system A (R}
Tape deck
(graphic equalizer).
CONNECTING SPEAKER WIRES
1. Strip off the vinyl covering and twist the tip of the wire.
2. Press the lever, and insert the wire into the hole.
Connect
@
to the speaker's
©
side,
and
©
to the
speaker's © side.
NOTE:
@
Remave
your finger fram the lever and pull the wire gently to
check that it is securely connected.
°
De not allow the wire core to protrude and touch other terminals
or wires. If the cores of differing wires touch, damage may be
caused ta your components.
4
<ARB1028>
Tape deck or adaptor component
Speaker
system A (L)
Speaker
system B (L)
litustration not applicable
to U. K. model.
Speaker
system B (R)
CONNECTING INPUT/OUTPUT CORDS
Connect the white plug to the L (left) side, and the red plug to
the R (right) side. Be sure to push the plugs in securely.
@.
White plug
L side
R side
Red plug
About Speaker impedance
When
speaker systems are connected
to only one of the
SPEAKERS
A, B terminalis, such speakers should have rated
impedance in the range of 6 — 16 ohms.