- ページ 8

アンプ Pioneer SA-6300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer SA-6300 13 ページ。 Integrated stereo amplifier
Pioneer SA-6300 にも：取扱説明書 (13 ページ)

ページを印刷する

EMPLOYING

TAPE

DECK

TAPE PLAYBACK

As shown in Fig. 7, the tape deck is connected to

TAPE PB jacks.

1. Set the TAPE MONITOR switch to ON.

2. Play tape on tape deck.

3. Adjust

the

VOLUME,

BASS

TREBLE

controls for desired volume and tone.

NOTE:

Turning the TAPE MONITOR

switch ON enables tape playback

whatever the setting of the

FUNCTION switch.

TAPE DECK

Fig. 7

TAPE RECORDING

As shown in Fig. 8, the tape deck is connected to

TAPE REC jacks.

1. Set the FUNCTION switch to the source to be

recorded (PHONO, TUNER, etc.).

2. Operate the program source.

3. Adjust

recording

levels

with

the

tape

deck

- controls and proceed with recording.

NOTE:

The SA-6300 VOLUME, BASS & TREBLE controls have no effect

upon the signal at the TAPE REC jacks. The signal is recorded as it

comes from the program source and must be adjusted with the

controls on the tape deck.

TAPE DECK

Fig. 8

Monitoring Recording Conditions

If the

tape

deck

is a 3-head

type

recording

conditions can be monitored through the speakers

headphones

by setting the TAPE

MONITOR

switch to ON. Both recording and playback con-

nections must be made in this case.

TAPE DUPLICATION AND EDITING

By employing

two

tape decks, selected

material

from a previously recorded tape can be edited onto

a second

tape.

personal

tape

library

can

compiled in this manner.

1. Connect two tape decks as shown in Fig. 9.

2. Set the FUNCTION switch to AUX, and operate

the tape deck connected to the AUX jacks as the

program source.

3. Record

the program

onto

the tape deck con-

nected to the TAPE terminals, controlling the

recording

level by

means

of the controls

that deck.

To monitor the recording while duplicating set

the TAPE MONITOR switch to ON.

TAPE DECK 2

(for recording)

TAPE DECK 1

(for playback)

i ig

FUNCTIO

Fig. 9